Bluetooth GPS

The GPS will come with a software driver which will add a virtual serial port to your PC.  The driver must be installed.

Connect the GPS to the computer.  Use the Find GPS Port button on the GPS tab in OziExplorer configuration. The ports on the PC will be scanned and the information about the GPS found will be displayed so the information can be manually entered into OziExplorer configuration.

In OziExplorer configuration -

• On the GPS Tab - choose the GPS Make as "Bluetooth GPS".
• On the COM Tab - select the Com Port - the com port to select is the the port installed by the GPS driver.
• On the COM Tab - select the NMEA Baud Rate - the Baud Rate can be different for each GPS, if unsure, check your GPS manual.