Moving Map User Defined Pointers

There are 3 user pointers which can be selected on the Moving Map tab in Configuration.

If Selecting User 1 the pointer will be read from a file called userPointer1.dat

User 2 from userPointer2.dat

User 2 from userPointer3.dat

OziExplorer reads the pointer from the file when moving map is started.

The drawing consists of a set of points which have lines drawn between them.

There is a limit on the size of the drawing, if it is too big it will be clipped when drawn onto the map. Use the example below as a for the size.

This is an example of a file (userPointer1.dat) which draws an aeroplane

;moving map user pointer
;aeroplane
;lines starting with ; are treated as comments and not read
;empty lines are not read
;file consists of a set of x,y coordinates - 1 set per line
;a maximum of 100 points
;whole numbers only
;the 0,0 coordinate is plotted at the GPS position
;OziExplorer loads this file when it starts moving map
0,0
3,3
3,7
15,7
15,11
3,13
1,22
5,22
5,26
0,27
0,24
0,27
-5,26
-5,22
-1,22
-3,13
-15,11
-15,7
-3,7
-3,3
0,0