;OziExplorer for PC Translation File ;Enter name of person doing Translation below (after the = ) (name will appear on splash screen). ;More than 1 name can be added, example if modifying an existing file. name1=Paul Dworniak name2= name3= ; ;Enter the version of this file below (after the = ) File version=1.0 ; ;Enter Language Code Page Name below (after the = ) LanguageName=Polski ; ;Enter Language Short Name below (after the = ) LanguageShortName=pol ; LanguageID=$0415 ; ;Enter LanguageID (locale id) above ;some examples ;$0405 - Czech ;$0406 - Dansk ;$0413 - Nederlands ;$040B - Suomi ;$040C - Français ;$0407 - Deutsch ;$0408 - Greek ;$040E - Hungarian ;$0410 - Italiano ;$0414 - Norsk ;$0415 - Polski ;$0816 - Portugese ;$04E3 - Russian ;$041B - Slovak ;$0424 - Slovene ;$040A - Espańol ;$041D - Swedish ; ;OziExplorer for PC Translation File ; ;DO NOT change any of the Actual english strings - these are used ;to determine where the translated string resides in the software. ; ;Only translate the strings you feel are necessary. ;Some strings are real names and may not need translating. ;If the translated string is the same as the English there is no need to enter it ; ;If there is more than one translation for the english string ;use the shortest option. ; ;Try to keep the translated strings as short as possible. ; ;The actual strings from OziExplorer have a label beside them ;as a guide to the type of string they are. ; ;Most (but not all) duplicate strings have been removed from the file ; ;Put the translation below the string item next to "*Trans* : " ;It is not necessary to put a " after the translated text ; ;Memo fields are handled differently and there are instructions ;above each memo. ; ;A '#13#10' in a string means start a new line - these can be used in the ;translation line as well. ;NOTE NOTE NOTE - #13#10 cannot be used in the drc file section ; ;A '#39' means include a ' in the string - a ' character can ;be used in the translations - the processing software will expand it ;Either way can be used but there is less chance of error if ;just a ' is used. ; ;A # at the start of a line means it is excluded from the processing ; ;------------------------------------------------------------------ ; ; ; Text : "About" *Trans* : "O programie Text : "System" *Trans* : " Text : "Close" *Trans* : "Zamknij ; Text : "Add/Edit Waypoint" *Trans* : "Dod/edyt pozycję Text : "Lat" *Trans* : "Szer Text : "Long" *Trans* : "Dł Text : "UTM Coordinates" *Trans* : "Współrzędne UTM Text : "feet" *Trans* : "stóp Text : "Cancel any Changes" *Trans* : "Odrzuć zmiany Text : "Cancel" *Trans* : "Anuluj Text : "Save the Waypoint Changes" *Trans* : "Zapisz zmiany pozycji Text : "Save" *Trans* : "Zapisz Text : "Name" *Trans* : "Nazwa Text : "Description" *Trans* : "Opis Text : "0" *Trans* : " Text : "1" *Trans* : " Text : "2" *Trans* : " Text : "3" *Trans* : " Text : "4" *Trans* : " Text : "5" *Trans* : " Text : "6" *Trans* : " Text : "7" *Trans* : " Text : "8" *Trans* : " Text : "9" *Trans* : " Text : "10" *Trans* : " Text : "11" *Trans* : " Text : "12" *Trans* : " Text : "13" *Trans* : " Text : "14" *Trans* : " Text : "15" *Trans* : " Text : "16" *Trans* : " Text : "17" *Trans* : " Text : "18" *Trans* : " Text : "19" *Trans* : " Text : "20" *Trans* : " Text : "21" *Trans* : " Text : "22" *Trans* : " Text : "23" *Trans* : " Text : "24" *Trans* : " Text : "25" *Trans* : " Text : "26" *Trans* : " Text : "27" *Trans* : " Text : "Symbol" *Trans* : " Text : "Deg" *Trans* : "St. Text : "Minutes" *Trans* : "Minut Text : "N" *Trans* : " Text : "S" *Trans* : " Text : "N/S" *Trans* : " Text : "E" *Trans* : " Text : "W" *Trans* : " Text : "E/W" *Trans* : " Text : "Zone" *Trans* : "Strefa Text : "WGS 84" *Trans* : " Text : "Position Datum" *Trans* : "Datum pozycji Text : "Help" *Trans* : "Pomoc Text : "Altitude" *Trans* : "Wysokość ; Text : "Route Properties" *Trans* : "Właściwości trasy Text : "Waypoints Available" *Trans* : "Dostępne miejsca Text : "Waypoints in Route" *Trans* : "Miejsca na trasie Text : "Add Selected Waypoints to the End of the Route" *Trans* : "Dodaj wybrane miejsca na końcu trasy Text : "Add >" *Trans* : "Dod > Text : "Select All Waypoints in Waypoint List" *Trans* : "Wybierz wszystkie punkty z listy Text : "< Select All" *Trans* : "< Wybierz wszystko Text : "Delete Selected Waypoints from Route List" *Trans* : "Usuń wybrane punkty z listy tras Text : "Show/Hide this Route on Map" *Trans* : "Pokaż/ukryj trasę na mapie Text : "Show" *Trans* : "Pokaż Text : "Insert Selected Waypoints before Selected Waypoint" *Trans* : "Wstaw wybrane miejsca przed wybranym miejscem Text : "Insert >" *Trans* : "Wstaw > Text : "Move Selected Waypoint Up" *Trans* : "Przesuń wybrane pozycje w górę Text : "Move Selected Waypoint Down" *Trans* : " Przesuń wybrane pozycje w dół Text : "OK" *Trans* : " Text : "Color" *Trans* : "Kolor Text : "UnSelect All Waypoints in Waypoint List" *Trans* : "Odznacz wszystkie pozycje z listy Text : "< Unselect" *Trans* : "< Odznacz Text : "UnSelect All Waypoints in Route List" *Trans* : "Odznacz wszystkie pozycje z listy tras Text : "Unselect >" *Trans* : "Odznacz > ; Text : "Append Point Sets" *Trans* : "Dołącz zestaw punktów Text : "Append from Point Set " *Trans* : "Dołącz z zestawu punktów Text : "To" *Trans* : "Do Text : "Append" *Trans* : "Dołącz ; Text : "Area Calculation" *Trans* : "Obliczanie powierzchni Text : "Square Meters" *Trans* : "Metry kwadr. Text : "Square Km" *Trans* : "km kwadr. Text : "Hectares" *Trans* : "Hektary Text : "Square Feet" *Trans* : "Stopy kwadr. Text : "Square Yards" *Trans* : "Jardy kwadr. Text : "Square Miles" *Trans* : "Mile kwadr. Text : "Acres" *Trans* : "Akry Text : " " *Trans* : " Text : "Close the Dialog" *Trans* : "Zamknij okienko Text : "Clear the Track Polygon" *Trans* : "Wyczyść szlaki Text : "Clear" *Trans* : "Wyczyść Text : "Area" *Trans* : "Obszar ; Text : "Import BSB Maps on CDROM or Hard Disk" *Trans* : "Importuj mapy BSB z pliku na CD lub na twardym dysku Text : "Image File Path" *Trans* : " Text : "Import" *Trans* : "Importuj ; Memo : "Use the Image File Path Combo box above to select the Drive and " Memo : "Directory where the KAP image files of the maps reside - this may be " Memo : "a CD or Hard Disk." Memo : "" Memo : "On the BSB CD these are usually in the BSBchart directory." Memo : "" Memo : "Use the Map File Path to specify where the imported maps are to be " Memo : "placed - note : new directories can be created." Memo : "" Memo : "After selecting the Directories press the Import button to proceed." *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans??: " *Trans??: " ; Text : "Map File Path" *Trans* : " Text : "Options" *Trans* : "Opcje ; Text : "BSB Import Options" *Trans* : " Text : "Shift Datum" *Trans* : "Przesunięcie datum ; Text : "Calibration Panel" *Trans* : "Kalibracja Text : " Setup " *Trans* : " Text : "Mag Var" *Trans* : "Odch.mag. Text : "Map Name" *Trans* : "Nazwa mapy Text : "Map Datum" *Trans* : "Datum mapy Text : "Show Map Options" *Trans* : "Pokaż opcje mapy Text : "Map Projection" *Trans* : " Text : "Show Map View Window" *Trans* : " Text : "Show Map Projection Setup options" *Trans* : " Text : "Projection Setup" *Trans* : "Ustawienia rzutowania Text : "Enter Datum Shift Values" *Trans* : " Text : "Show Cursor Zoom Window" *Trans* : " Text : "Show/Hide Corner Markers" *Trans* : " Text : "Point 1" *Trans* : "Punkt 1 Text : "Degrees && Mins" *Trans* : "Stopnie i minuty Text : "Image Coordinates" *Trans* : " Text : "X" *Trans* : " Text : "Y" *Trans* : " Text : "Include in Calibration" *Trans* : "Włącz do kalibracji Text : "Get the Calibration coordinates from a Waypoint" *Trans* : "Weź współrzędne do kalibracji z punktu Text : "Wp" *Trans* : " Text : "Point 2" *Trans* : "Punkt 2 Text : "Point 3" *Trans* : "Punkt 3 Text : "Point 4" *Trans* : "Punkt 4 Text : "Point 5" *Trans* : "Punkt 5 Text : "Point 6" *Trans* : "Punkt 6 Text : "Point 7" *Trans* : "Punkt 7 Text : "Point 8" *Trans* : "Punkt 8 Text : "Point 9" *Trans* : "Punkt 9 Text : "Cancel Calibration" *Trans* : "Anuluj kalibrację Text : "Process Calibration and Save as a Map" *Trans* : "Przeprowadź kalibrację i zapisz jako mapę ; Text : "CFS Find Map" *Trans* : " Text : "Show Help" *Trans* : "Pokaż pomoc Text : "Find the Position on the Specified map" *Trans* : "Znajdź pozycję na podanej mapie Text : "Find" *Trans* : "Znajdź Text : "Close Window" *Trans* : "Zamknij okno Text : "Map Files (*.map)|*.map" *Trans* : "Pliki map (*.map)|*.map Text : "Position" *Trans* : "Pozycja ; Text : "CFS Draw Track" *Trans* : " Text : "Draw the Track on the Specified Map" *Trans* : "Rysuj szlak na określonej mapie Text : "Create" *Trans* : "Twórz Text : " Track Points " *Trans* : "Punkty szlaku Text : "Track No" *Trans* : "Szlak nr Text : "Area Type" *Trans* : "Typ obszaru Text : "Line Type" *Trans* : "Typ linii ; Text : "Select Display Format" *Trans* : "Wybierz format wyświetlania Text : "Save the Changes" *Trans* : "Zachowaj zmiany Text : "Change" *Trans* : "Zmień Text : "Number Only" *Trans* : "Tylko numer Text : "Name Only" *Trans* : "Tylko nazwa Text : "Number and Name" *Trans* : "Numer i nazwa Text : "Name with Dot" *Trans* : "Nazwa z kropką Text : "Name with Symbol" *Trans* : "Nazwa z symbolem Text : "Symbol Only" *Trans* : "Tylko symbol Text : "Comment with Symbol" *Trans* : "Komentarz z symbolem Text : "Man Overboard" *Trans* : "Człowiek za burtą Text : "Marker" *Trans* : "Znacznik Text : "Display Format" *Trans* : "Format wyświetlania ; Text : "Select Garmin GPS Display Format" *Trans* : " Text : "Garmin GPS Display" *Trans* : " ; Text : "Select New Symbol" *Trans* : "Wybierz nowy symbol ; Text : "Configuration" *Trans* : "Konfiguracja Text : "Data File Datum" *Trans* : "Datum pliku danych Text : " At Startup " *Trans* : "Przy uruchomieniu Text : "and Position" *Trans* : "i pozycja Text : "Load Last Map" *Trans* : "Ładuj ostatnią mapę Text : "Show Map View" *Trans* : "Pokaż podgląd mapy Text : "Set Last Zoom" *Trans* : "Ustaw ostatni zoom Text : "Show Zoom Window" *Trans* : "Pokaż okno zoom Text : " File Paths " *Trans* : "Ścieżki dostępu Text : "Data File Path" *Trans* : " Text : "Maximized" *Trans* : " Text : "At Stored Position" *Trans* : "W zapamiętanej pozycji Text : "Window Position" *Trans* : "Pozycja okna Text : "Save Position and Size of OziExplorer Window Now" *Trans* : "Zapamiętaj pozycję i rozmiar ekranu programu OziExplorer Text : "Store Window Position" *Trans* : "Zapamiętaj pozycję okna Text : "Ask before Quitting" *Trans* : "Zapytaj przed wyjściem Text : " Map Scroll Increment" *Trans* : "Skok przewijania mapy Text : "Maps" *Trans* : "Mapy Text : "Kilometers" *Trans* : "Kilometry Text : "Miles" *Trans* : "Mile Text : "Nautical Miles" *Trans* : "Mile morskie Text : "Distance Units" *Trans* : "Jednostki odległości Text : "Create Map Thumbnail" *Trans* : "Utwórz miniaturę mapy Text : "KPH" *Trans* : "km/h Text : "MPH" *Trans* : "mile/h Text : "Knots" *Trans* : "węzły Text : "Speed Units" *Trans* : "Jednostki prędkości Text : " North & East (NE)" *Trans* : " Text : " North & West (NW)" *Trans* : " Text : " South & East (SE)" *Trans* : " Text : " South & West (SW)" *Trans* : " Text : "Alaska (NW)" *Trans* : " Text : "Argentina (SW)" *Trans* : " Text : "Australia (SE)" *Trans* : " Text : "Austria (NE)" *Trans* : " Text : "Belgium (NE)" *Trans* : " Text : "Boliva (SW)" *Trans* : " Text : "Brazil Nth (NW)" *Trans* : " Text : "Brazil Sth (SW)" *Trans* : " Text : "Burma (NE)" *Trans* : " Text : "Canada (NW)" *Trans* : " Text : "Chile (SW)" *Trans* : " Text : "China (NE)" *Trans* : " Text : "Cuba (NW)" *Trans* : " Text : "Denmark (NE)" *Trans* : " Text : "Egypt (NE)" *Trans* : " Text : "England East (NE)" *Trans* : " Text : "England West (NW)" *Trans* : " Text : "Finland (NE)" *Trans* : " Text : "France East (NE)" *Trans* : " Text : "France West (NW)" *Trans* : " Text : "Germany (NE)" *Trans* : " Text : "Greece (NE)" *Trans* : " Text : "Greenland (NW)" *Trans* : " Text : "Iceland (NW)" *Trans* : " Text : "India (NE)" *Trans* : " Text : "Indonesia Nth (NE)" *Trans* : " Text : "Indonesia Sth (SE)" *Trans* : " Text : "Ireland (NW)" *Trans* : " Text : "Italy (NE)" *Trans* : " Text : "Japan (NE)" *Trans* : " Text : "Korea Nth (NE)" *Trans* : " Text : "Korea Sth (NE)" *Trans* : " Text : "Malaysia (NE)" *Trans* : " Text : "Mexico (NW)" *Trans* : " Text : "Netherlands (NE)" *Trans* : " Text : "New Zealand (SE)" *Trans* : " Text : "Norway (NE)" *Trans* : " Text : "Pakistan (NE)" *Trans* : " Text : "Papua New Guinea (SE)" *Trans* : " Text : "Peru (SW)" *Trans* : " Text : "Phillipines (NE)" *Trans* : " Text : "Poland (NE)" *Trans* : " Text : "Portugal (NW)" *Trans* : " Text : "Scotland (NW)" *Trans* : " Text : "South Africa (SE)" *Trans* : " Text : "Spain East (NE)" *Trans* : " Text : "Spain West (NW)" *Trans* : " Text : "Sweden (NE)" *Trans* : " Text : "Switzerland (NE)" *Trans* : " Text : "Taiwan (NE)" *Trans* : " Text : "Thailand (NE)" *Trans* : " Text : "USA (NW)" *Trans* : " Text : "Vietnam (NE)" *Trans* : " Text : "Wales (NW)" *Trans* : " Text : "Country or Region" *Trans* : " Text : " Map Load Options " *Trans* : " Text : "Keep Zoom Level" *Trans* : " Text : "Keep Map Objects" *Trans* : " Text : "Blank Map Datum" *Trans* : "Datum pustej mapy Text : "Spherical" *Trans* : "Sferyczny Text : "Ellipsoid" *Trans* : "Eliptyczny Text : "Distance Calcs" *Trans* : " Text : "Degrees" *Trans* : "Stopni Text : "Deg, Min" *Trans* : "St.min. Text : "Deg, Min, Sec" *Trans* : "St.min.sek. Text : "Lat/Long Display" *Trans* : " Text : "Feet" *Trans* : "stóp Text : "Meters" *Trans* : "metrów Text : "Altitude Units" *Trans* : "Jednostki wysokości Text : "True" *Trans* : "Rzeczywista Text : "Magnetic" *Trans* : "Magnetyczna Text : "Bearings" *Trans* : " Text : " Alternate Grid " *Trans* : " Text : "UTM" *Trans* : " Text : "BNG" *Trans* : " Text : "NZG" *Trans* : " Text : "Swedish" *Trans* : " Text : "Swiss" *Trans* : " Text : "User Grid" *Trans* : " Text : "Irish" *Trans* : " Text : "French I" *Trans* : " Text : "French II" *Trans* : " Text : "French III" *Trans* : " Text : "French IV" *Trans* : " Text : "MGRS" *Trans* : " Text : "Maidenhead" *Trans* : " Text : "Montana SP" *Trans* : " Text : "Use Map User Grid" *Trans* : " Text : "Map Images" *Trans* : " Text : "Check Drives" *Trans* : " Text : " Image File Paths " *Trans* : " Text : "Path 2" *Trans* : " Text : "Path 1" *Trans* : " Text : "Path 3" *Trans* : " Text : "Path 4" *Trans* : " Text : "Always Check All CD Drives" *Trans* : " Text : "GPS" *Trans* : " Text : "GPS Model" *Trans* : "Model GPSu Text : " GPS Parameters " *Trans* : "Parametry GPSu Text : "No. of Waypoints" *Trans* : "Liczba miejsc Text : "No. of Events" *Trans* : "Liczba wydarzeń Text : "No. of Track Points" *Trans* : "Liczba punktów szlaku Text : "No. of Tracks" *Trans* : "Liczba szlaków Text : "Wp Name Length" *Trans* : "Długość nazwy miejsca Text : "No. of Routes" *Trans* : "Liczba tras Text : "No. Wp'#39's per Route" *Trans* : "Liczba miejsc'#39'na trasę Text : "Garmin Protocol Warning" *Trans* : " Text : "GPS Upload/Download Datum" *Trans* : " Text : "GPS NMEA Output Datum" *Trans* : " Text : "Eagle" *Trans* : " Text : "Garmin" *Trans* : " Text : "Lowrance" *Trans* : " Text : "Magellan" *Trans* : " Text : "MLR" *Trans* : " Text : "NMEA only" *Trans* : " Text : "GPS Make" *Trans* : " Text : "GPS Symbol Set" *Trans* : " ; Memo : "Please read the Help for " Memo : "essential information on " Memo : "how to setup the config-" Memo : "uration" *Trans* : "Przeczytaj plik pomocy *Trans* : "aby poznać wazniejsze *Trans* : "informacje o konfigu- *Trans* : "racji *Trans??: " *Trans??: " ; Text : "Create a new OziExplorer symbol set to suit a specific model of Garmin GPS" *Trans* : " Text : "COM" *Trans* : " Text : " General COM Settings " *Trans* : " Text : "None" *Trans* : " Text : "Even" *Trans* : " Text : "Odd" *Trans* : " Text : "Parity" *Trans* : " Text : "Com Port" *Trans* : " Text : " NMEA Baud Rate " *Trans* : " Text : "1200" *Trans* : " Text : "2400" *Trans* : " Text : "4800" *Trans* : " Text : "9600" *Trans* : " Text : "19200" *Trans* : " Text : "38400" *Trans* : " Text : "57600" *Trans* : " Text : "115200" *Trans* : " Text : " Upload/Download Baud Rate " *Trans* : " Text : " Auto Pilot Output (Not proven - Experimental Only) " *Trans* : " Text : "Baud Rate" *Trans* : " Text : "Active" *Trans* : " Text : "Interval" *Trans* : " Text : "Use PVT for Garmin instead of NMEA" *Trans* : " Text : " Serial Port Driver " *Trans* : " Text : "Driver 1" *Trans* : " Text : "Driver 2" *Trans* : " Text : "Objects" *Trans* : " Text : " Reserved Waypoints " *Trans* : " Text : "Lower" *Trans* : " Text : "Upper" *Trans* : " Text : "Route Line Width" *Trans* : " Text : "Track" *Trans* : " Text : "Default Track Color" *Trans* : " Text : "Default Track Width" *Trans* : " Text : " Track Control " *Trans* : " Text : "ToolBar Only" *Trans* : " Text : "ToolBar + All Tracks" *Trans* : " Text : "Initial Size" *Trans* : " Text : "Moving Map" *Trans* : " Text : "Auto Log Track to File" *Trans* : " Text : "Screen Update Rate" *Trans* : " Text : "Keep Map Centered on Position" *Trans* : " Text : "Center when Near Window Edge" *Trans* : " Text : "Show More Map in Heading Direction" *Trans* : " Text : "Scroll Method" *Trans* : " Text : "Set to 0 to show all points" *Trans* : " Text : "Track Tail Length" *Trans* : " Text : " Always Check for More Detailed Map " *Trans* : " Text : "Check Interval (secs)" *Trans* : " Text : "Arrow 1" *Trans* : " Text : "Arrow 2" *Trans* : " Text : "Plane" *Trans* : " Text : "Boat 1" *Trans* : " Text : "Boat 2" *Trans* : " Text : "Auto 1" *Trans* : " Text : "Shape 1" *Trans* : " Text : "Cross Hair" *Trans* : " Text : "Pointer" *Trans* : " Text : "Scale" *Trans* : " Text : "Pointer Color" *Trans* : " Text : " NMEA Check Sum " *Trans* : " Text : "Check" *Trans* : " Text : "Pointer Solid Color" *Trans* : " Text : "Dock Controls" *Trans* : " Text : "Moving Map looks for Maps only in the '#13#10'Directory of the currently loaded map" *Trans* : " Text : "Current Map Path" *Trans* : " Text : "Yards" *Trans* : " Text : "30" *Trans* : " Text : "40" *Trans* : " Text : "50" *Trans* : " Text : "60" *Trans* : " Text : "70" *Trans* : " Text : "80" *Trans* : " Text : "90" *Trans* : " Text : "100" *Trans* : " Text : "200" *Trans* : " Text : "300" *Trans* : " Text : "400" *Trans* : " Text : "500" *Trans* : " Text : "600" *Trans* : " Text : "700" *Trans* : " Text : "800" *Trans* : " Text : "900" *Trans* : " Text : "1000" *Trans* : " Text : "Store Track Point Interval" *Trans* : " Text : "Ignore Maps with Error" *Trans* : " Text : "Navigation" *Trans* : " Text : "Set Compass Rose Configuration" *Trans* : " Text : "Compass" *Trans* : " Text : "Show Leg Details" *Trans* : " Text : "Show Line from Position" *Trans* : " Text : "Alarm Duration" *Trans* : " Text : "Route Wp Proximity" *Trans* : " Text : "Leg Distance Color" *Trans* : " Text : "Line Width" *Trans* : " Text : "Line Color" *Trans* : " Text : "Project Track Line" *Trans* : " Text : "GPS Sim" *Trans* : " Text : "Initial Zoom Range" *Trans* : " Text : "Units" *Trans* : " Text : "Numbers" *Trans* : " Text : "Names" *Trans* : " Text : "Waypoint Show Format" *Trans* : " ; Text : "Compass Rose Configuration" *Trans* : "Konfiguracja róży wiatrów Text : "Show Compass Rose" *Trans* : "Pokaż różę wiatrów Text : "Compass Size" *Trans* : "Wielkość kompasu Text : "Circle Color" *Trans* : "Kolor koła Text : "Circle Line Width" *Trans* : "Grubość brzegu koła Text : "True North" *Trans* : " Text : "Magnetic North" *Trans* : " Text : "Course" *Trans* : " Text : "Direction" *Trans* : " Text : "Cross Length" *Trans* : " ; Text : "Creating mapView Image" *Trans* : " Text : "Creating MapView Image - please wait" *Trans* : " Text : "0 of 0" *Trans* : " ; Text : "Select Datum" *Trans* : " Text : " " *Trans* : " Text : "Continue" *Trans* : " ; Text : "Select Display Datum" *Trans* : " Text : "Set the Display Datum to the Datum of the currently Loaded Map" *Trans* : " Text : "Accept the Selected Datum" *Trans* : " ; Text : "Datum Shift Values" *Trans* : " Text : "latitude Shift (secs)" *Trans* : " Text : "Longitude Shift (secs)" *Trans* : " Text : "Shift Datum Name" *Trans* : " Text : " Mode " *Trans* : " Text : "Shift Calibration" *Trans* : " ; Text : "Datum List" *Trans* : " Text : "Radius (a)" *Trans* : " Text : "1/f" *Trans* : " Text : "Delta X" *Trans* : " Text : "Delta Y" *Trans* : " Text : "Delta Z" *Trans* : " ; Text : "Distance & Bearing Display" *Trans* : " Text : "Distance" *Trans* : " Text : "True Bearing" *Trans* : " Text : "Mag Bearing" *Trans* : " Text : "Total Distance" *Trans* : " Text : "Zero Total Distance" *Trans* : " ; Text : "Download WPL Waypoints" *Trans* : " Text : "Close and Cancel Waypoint download" *Trans* : " Text : "GPS Output" *Trans* : " ; Text : "DRG Import Defaults" *Trans* : " Text : "Map UTM Zone" *Trans* : " Text : "Always Ask" *Trans* : " Text : "False Easting" *Trans* : " Text : "False Northing" *Trans* : " Text : "Hemisphere" *Trans* : " Text : "Albers" *Trans* : " Text : "Lat/Lon" *Trans* : " Text : "NZ Grid" *Trans* : " Text : "Swedish Grid" *Trans* : " Text : "Montana SP 2500" *Trans* : " ; Text : "Datum Shift - Sel. Datum to Map Datum" *Trans* : " Text : "Datum" *Trans* : " Text : "Wp Shift" *Trans* : " Text : " Direction " *Trans* : " Text : "Forward" *Trans* : " Text : "Reverse" *Trans* : " ; Text : "E00 File Import" *Trans* : " Text : " ARC to Tracks - LABELS to Points " *Trans* : " Text : "Track/Points No" *Trans* : " Text : "Track Color" *Trans* : " Text : "Track Width" *Trans* : " Text : " Read " *Trans* : " Text : "Tracks" *Trans* : " Text : "Points" *Trans* : " Text : "Both" *Trans* : " Text : "E00 File (*.e00)|*.e00" *Trans* : " Text : "Import E00 File" *Trans* : " ; Text : "ECW Map Import" *Trans* : " Text : "ECW File Path" *Trans* : " ; Memo : "Use the ECW File Path Combo box above to select the Drive and " Memo : "Folder where the ECW image files of the maps reside - this may be " Memo : "a CD or Hard Disk. These files have a .ECW extension." Memo : "" Memo : "Use the Map File Path to specify where the imported maps are to be " Memo : "placed - note : new folders can be created." Memo : "" Memo : "After selecting the Paths press the Import button to proceed." Memo : "" Memo : "NOTE : Only map projections based on UTM or Lat/Lon (Geodetic)" Memo : "can be imported." *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans??: " *Trans??: " ; Text : "Edit Date and Time" *Trans* : " Text : "Date" *Trans* : " Text : "Time" *Trans* : " ; Text : "Edit Position" *Trans* : "Edytuj pozycję Text : " Degrees && Minutes " *Trans* : " Stopni && Minut Text : " UTM " *Trans* : " Text : " Position Format " *Trans* : " Text : "Degrees && Minutes" *Trans* : " Stopni && Minut Text : "Set to the Datum of the currently Loaded Map" *Trans* : " ; Text : "Event Properties" *Trans* : " Text : "Save Changes into Memory" *Trans* : " Text : "Cancel and close the window" *Trans* : " Text : "Event Symbol" *Trans* : " Text : "Fore Color" *Trans* : " Text : "Back Color" *Trans* : " Text : "Symbol Size" *Trans* : " Text : "Make Current Settings the Default for All New Events" *Trans* : " Text : "Default" *Trans* : " ; Text : "Event List" *Trans* : " Text : "Number" *Trans* : " Text : "On Map" *Trans* : " Text : "Latitude" *Trans* : " Text : "Longitude" *Trans* : " Text : "Delete the Selected Events" *Trans* : " Text : "Delete" *Trans* : " Text : "Close the Event List" *Trans* : " Text : "Select all Waypoints which do not plot within the boundaries of the current Map'#13#10'The Waypoints are shown with "No" in the On Map column'#13#10'After selecting they can then be deleted if desired" *Trans* : " Text : "Select all Events which do not plot within the boundaries of the current Map'#13#10'The Events are shown with "No" in the On Map column'#13#10'After selecting they can then be deleted if desired" *Trans* : " Text : "Select if not on Map" *Trans* : " Text : "Edit Properties of the Selected Waypoint" *Trans* : " Text : "Properties" *Trans* : " Text : "Display Position in Degrees" *Trans* : " Text : "Display Position in Alternate Grid" *Trans* : " Text : "Find Map for Selected Event" *Trans* : " Text : "Change Symbol for All Selected Events" *Trans* : " Text : "Plot Location of Selected Event on Current Map" *Trans* : " Text : "cDatum" *Trans* : " Text : "bMapDatum" *Trans* : " ; Text : "Export Tracks to Text File" *Trans* : "Eksportuj ślady do pliku tekstowego Text : "Export File Datum" *Trans* : "Datum pliku wyjściowego Text : "(D) Degrees " *Trans* : " Text : "(DMX) Full Degrees & Minutes " *Trans* : " Text : "(DMSX) Full Deg & Minutes & Secs " *Trans* : " Text : "(USER) Transverse Mercator" *Trans* : " Text : "Waypoint+" *Trans* : " Text : "Record Format" *Trans* : " ; Text : "Function Key Assignments" *Trans* : "Przypisania klawiszy funkcyjnych Text : "F2" *Trans* : " Text : "F3" *Trans* : " Text : "F4" *Trans* : " Text : "F5" *Trans* : " Text : "F6" *Trans* : " Text : "F7" *Trans* : " Text : "F8" *Trans* : " Text : "F9" *Trans* : " Text : "F10" *Trans* : " Text : "F11" *Trans* : " Text : "F12" *Trans* : " ; Text : "Garmin Symbol Set Creator" *Trans* : " Text : "cGpsSymbolSet" *Trans* : " Text : "123" *Trans* : " Text : "3456" *Trans* : " Text : "45tttt" *Trans* : " Text : "Create a Blank symbol set using the New Name" *Trans* : " Text : "Add New" *Trans* : " Text : "New Name" *Trans* : " Text : "Copy the currently selected symbol set to the New Name" *Trans* : " Text : "Copy From" *Trans* : " Text : "Save the Symbol Set to the specified name" *Trans* : " Text : "Delete the Selected Symbol'#13#10'The Standard sets cannot be deleted" *Trans* : " Text : "Close the dialog" *Trans* : " Text : "Show the available help" *Trans* : " ; Text : "Garmin Track Selection" *Trans* : " Text : "Track Name" *Trans* : " Text : " Track Type" *Trans* : " Text : "Active Track" *Trans* : " Text : "Saved track" *Trans* : " ; Text : "Search Path :" *Trans* : " Text : "Open the Selected Map" *Trans* : " Text : "Open" *Trans* : " Text : "Stop Scanning the Maps" *Trans* : " Text : "Stop Scanning" *Trans* : " Text : "Auto Close Window on Map Open" *Trans* : " ; Text : "Enter Name" *Trans* : "Wpisz nazwę ; Text : "GPS Fix Data" *Trans* : " Text : "Fix Quality" *Trans* : " Text : "Number Satellites" *Trans* : " Text : "HDOP" *Trans* : " Text : "DGPS Last Update" *Trans* : " Text : "DGPS Station" *Trans* : " ; Text : "Grid Configuration" *Trans* : " Text : "No Grid" *Trans* : " Text : "30 Deg" *Trans* : " Text : "20 Deg" *Trans* : " Text : "10 Deg" *Trans* : " Text : "5 Deg" *Trans* : " Text : "2 Deg" *Trans* : " Text : "1 Deg" *Trans* : " Text : "30 Min" *Trans* : " Text : "15 Min" *Trans* : " Text : "10 Min" *Trans* : " Text : "5 Min" *Trans* : " Text : "2 Min" *Trans* : " Text : "1 Min" *Trans* : " Text : "30 Sec" *Trans* : " Text : "15 Sec" *Trans* : " Text : "10 Sec" *Trans* : " Text : "5 Sec" *Trans* : " Text : "2 Sec" *Trans* : " Text : "1 Sec" *Trans* : " Text : "Line Interval" *Trans* : " Text : "Deg Line Color" *Trans* : " Text : "Min Line Color" *Trans* : " Text : "Sec Line Color" *Trans* : " Text : "Label Color" *Trans* : " Text : "Save Lat/Lon Setup as Map Default" *Trans* : " Text : "Auto Scale" *Trans* : " Text : "No Labels" *Trans* : " Text : "Label Interval" *Trans* : " Text : "Grid On" *Trans* : " Text : "Font Size" *Trans* : " Text : " Label Screen Display " *Trans* : " Text : "Only on map Borders" *Trans* : " Text : "On all Screens" *Trans* : " Text : "Other Grid" *Trans* : " Text : "500 Km" *Trans* : " Text : "200 Km" *Trans* : " Text : "100 Km" *Trans* : " Text : "50 Km" *Trans* : " Text : "20 Km" *Trans* : " Text : "10 Km" *Trans* : " Text : "5 Km" *Trans* : " Text : "2 Km" *Trans* : " Text : "1 Km" *Trans* : " Text : "500 m" *Trans* : " Text : "200 m" *Trans* : " Text : "100 m" *Trans* : " Text : "50 m" *Trans* : " Text : "20 m" *Trans* : " Text : "10 m" *Trans* : " Text : "5 m" *Trans* : " Text : "2 m" *Trans* : " Text : "1 m" *Trans* : " Text : "Km Line Color" *Trans* : " Text : "Metre Line Color" *Trans* : " Text : "Save Other Grid Setup as Map Default" *Trans* : " Text : " Numbers " *Trans* : " Text : "Normal" *Trans* : " Text : "No Meters" *Trans* : " Text : "Last 3 Digits" *Trans* : " Text : "Close the Window" *Trans* : " Text : "Help for Grid Line Setup" *Trans* : " Text : "Clip to Neat Line" *Trans* : " Text : "Make Current Settings the Default for All New Grids" *Trans* : " ; Text : "Do not Show this Message Again" *Trans* : " Text : "HHWIN123" *Trans* : " Text : "HH Window" *Trans* : " ; Text : "HTML Help Warning" *Trans* : " ; Memo : " " Memo : " Your system does not support the use of Windows HTML Help," Memo : " or the HTML Help library file versions are too old." Memo : "" Memo : " To access the help, you may install Internet Explorer 4 or better," Memo : " or update your HTML Help libraries from Microsoft." Memo : "" Memo : " Another option is to install OziHelp which is available on" Memo : " www.oziexplorer.com , with this system all the help is available" Memo : " but there is no search or index capabilities." *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans??: " *Trans??: " ; Text : "Icons" *Trans* : "Ikony ; Text : "Import DRG Maps on CDROM or Hard Disk" *Trans* : " ; Memo : "Use the Image File Path Combo box above to select the Drive and " Memo : "Directory where the image files of the maps reside - this may be a " Memo : "CD or Hard Disk." Memo : "" Memo : "Example - For USGS DRG CD'#39's the image files are in TIF format and " Memo : "they are usually stored in the DATA directory (folder)." Memo : "" Memo : "Use the Map File Path to specify where the imported maps are to be " Memo : "placed - note : new directories (folders) can be created." Memo : "" Memo : "After selecting the Paths press the Import button to proceed." *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans??: " *Trans??: " ; Text : "Use Geotiff if available" *Trans* : " ; Text : "Import OziExplorer Map Files (*.map)" *Trans* : "Importuj mapy OziExplorera (*.map) Text : "Source Map File Path" *Trans* : "Plik źródłowego Text : "Destination Map File Path" *Trans* : "Plik docelowy ; Memo : "Use the Source Map File Path Combo box above to select the Drive and " Memo : "Directory where the OziExplorer .map files reside - this is usually a CD." Memo : "" Memo : "Use the Destination Map File Path to specify where the imported maps are " Memo : "to be placed - note : new directories can be created." Memo : "" Memo : "After selecting the Directories press the Import button to proceed, all " Memo : "directories on the CD are processed." Memo : "" Memo : "The .map files are copied, they are changed from read only and the path" Memo : "to the image file is updated to point to the path where the image file is found." *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans??: " *Trans??: " ; Text : "Import Waypoint Text File" *Trans* : "Importuj punkty z pliku tekstowego Text : "Import File Datum" *Trans* : "Datum pliku importowanego Text : " Replace or Append " *Trans* : "Zamień lub dołącz Text : "Append to Waypoints" *Trans* : "Dołącz punkty Text : "Replace Waypoints" *Trans* : "Zamień punkty ; Text : "Index Map" *Trans* : " Text : "Label1" *Trans* : " Text : "Zoom Percent" *Trans* : "Zoom Text : "100%" *Trans* : " Text : "Zoom In" *Trans* : "Przybliż Text : "Zoom Out" *Trans* : "Oddal Text : "Show Menu" *Trans* : "Pokaż menu Text : "Set Search Path to the Map File Path set in main configuration" *Trans* : " Text : "Load New Index Map" *Trans* : " Text : "Close the Window and unload the map" *Trans* : "Zamknij okno i mapę Text : "The Search Path for Maps to Outline on Index Map" *Trans* : " Text : "Lock Search path to map currently loaded in the main window" *Trans* : " Text : "Lock" *Trans* : "Zablokuj Text : "Search Sub-Folders attached to the search folder" *Trans* : "Szukaj w podfolderach Text : "Sub-Folders" *Trans* : "Podfoldery Text : "Hide the Window" *Trans* : "Ukryj okno Text : "Automatically Resize window to fit the Map" *Trans* : "Automatycznie dopasuj okno do rozmiarów mapy Text : "Size" *Trans* : "Rozmiar Text : "Refresh Maps" *Trans* : "Odśwież mapę Text : "-" *Trans* : " Text : "Recent Index Maps" *Trans* : " Text : "Recent Search Paths" *Trans* : " Text : "Load New Map" *Trans* : "Wczytaj nową mapę Text : "Highlight " *Trans* : "Podświetl Text : "Fast Draw" *Trans* : " Text : "Open Map File" *Trans* : "Otworz plik mapy ; Text : "Information" *Trans* : "Informacja Text : "Parameter" *Trans* : " Text : "Details" *Trans* : "Szczegóły ; Text : "Map Legend" *Trans* : " ; Text : "Stop Transfer" *Trans* : "Zatrzymaj transfer ; Text : "Form1" *Trans* : " ; Text : " OziExplorer " *Trans* : " Text : "---" *Trans* : " Text : "Waypoint" *Trans* : "Punkt docelowy Text : "Event" *Trans* : " Text : "Map" *Trans* : "Mapa Text : "Route" *Trans* : "Trasa Text : "Save All Files" *Trans* : "Zachowaj wszystkie pliki Text : "Select the Display datum" *Trans* : " Text : "Tahoma" *Trans* : " Text : "Position & Set Waypoints on Map" *Trans* : "Kliknij na mapie aby utworzyć punkt docelowy Text : "Position & Set Map Features on Map" *Trans* : " Text : "Show/Hide the Cursor Zoom window" *Trans* : "Pokaż/ukryj okno kursor-lupa Text : "Quit the Application" *Trans* : "Wyjdź z programu Text : "Quit" *Trans* : "Wyjdź Text : "Load File Menu" *Trans* : "Menu wczytywania danych Text : "Load" *Trans* : "Wczytaj Text : "Save File Menu" *Trans* : "Menu zachowywania danych Text : "Show all Vital Information" *Trans* : "Pokaż wszystkie ważne informacje Text : "Info" *Trans* : " Text : "Show/Hide the Map View window" *Trans* : "Pokaż/ukryj okno podglądu mapy Text : "Manually create Track Points" *Trans* : "Ręczne tworzenie punktów śladu Text : "Mark Position on map, Draw Distance Line, Center the Simulated GPS" *Trans* : " Text : "Show/Hide Tracks on Map (All Tracks)" *Trans* : "Pokaż/ukryj ślady na mapie (wszystkie) Text : "Show/Hide Track Control" *Trans* : "Pokaż/ukryj pasek Track Control Text : "Show/Hide the Simulated GPS" *Trans* : "Pokaż/ukryj symulowany GPS Text : "Show/Hide the Route editor" *Trans* : "Pokaż/ukryj edytor tras Text : "Show/Hide Route Plot" *Trans* : "Pokaż/ukryj rysowanie tras Text : "Scroll Map by Dragging" *Trans* : "Przewijanie mapy przeciąganiem Text : "Drag" *Trans* : "Przeciągnij Text : "Show the Waypoint List" *Trans* : "Pokaż listę punktów Text : "Show the Distance between Waypoints Window" *Trans* : "Pokaż okno odległości pomiędzy punktami Text : "Find Maps West of this Map" *Trans* : "Znajdź mapy na zachód od tej Text : "Find Maps North of this Map" *Trans* : "Znajdź mapy na północ od tej Text : "Find Maps South of this Map" *Trans* : "Znajdź mapy na południe od tej Text : "Find Maps East of this Map" *Trans* : "Znajdź mapy na wschód od tej Text : "Find Other Maps at this Position" *Trans* : "Znajdź inne mapy dla tej pozycji Text : "Position & Set Events on Map" *Trans* : " Text : "Position & Set Map Comments on Map" *Trans* : " Text : "Show Line from Position to Cursor" *Trans* : "Pokaż linię od pozycji do kursora Text : "Show the Distance and Bearing Display" *Trans* : "Pokaż okno odległości i azymutu Text : "Hide Toolbar" *Trans* : "Ukryj pasek narzędzi Text : "Show Toolbar" *Trans* : "Pokaż pasek narzędzi Text : "Show the Index Map" *Trans* : "Pokaż Index Map Text : "Index" *Trans* : " Text : "Show OziMC Feature Edit Dialog" *Trans* : " Text : "Lock Map Find/Searching to Current Map Path " *Trans* : " Text : "Show/Hide Points on Map (All Sets)" *Trans* : "Pokaż/ukryj punkty na mapie (wszystkie) Text : "Show/Hide Point Control" *Trans* : "Pokaż/ukryj Point Control Text : "Manually create a Point" *Trans* : "Ręcznie utwórz punkt Text : "Search by Place Name" *Trans* : "Szukaj po nazwie miejsca Text : "Reset Mouse Pointer" *Trans* : " Text : "Show the Map Legend" *Trans* : "Pokaż legendę mapy Text : "Legend" *Trans* : "Legenda Text : "Select the Zoom Range (%) for the Map" *Trans* : "Wybierz poziom przybliżenia (%) dla tej mapy Text : "33" *Trans* : " Text : "125" *Trans* : " Text : "150" *Trans* : " Text : "250" *Trans* : " Text : "oc1" *Trans* : " Text : "Show/Hide Toolbar" *Trans* : "Pokaż/ukryj pasek narzędziowy Text : "File" *Trans* : "Plik Text : "Load from File" *Trans* : "Wczytaj z pliku Text : "Save to File" *Trans* : "Zapisz do pliku Text : "Close Map" *Trans* : "Zamknij mapę Text : "Load and Calibrate Map Image" *Trans* : "Wczytaj i skalibruj obraz mapy Text : "Check Calibration of Map" *Trans* : "Sprawdź kalibrację mapy Text : "Change Image File Name, Path && Drive" *Trans* : "Zmień nazwę pliku, ścieżkę && dysk Text : "Import Map" *Trans* : "Importuj mapę Text : "Single DRG Map" *Trans* : " Text : "All DRG Maps on CD" *Trans* : " Text : "Single BSB or NOS/GEO Chart" *Trans* : " Text : "All BSB or NOS/GEO Charts on CD" *Trans* : " Text : "Maptech RML or PCX Charts" *Trans* : " Text : "QuoVadis Navigator Maps on CD" *Trans* : " Text : "Sweden RIK Maps" *Trans* : " Text : "ECW Maps (UTM or Lat/Lon based only)" *Trans* : " Text : "OziExplorer NZT Map Files" *Trans* : " Text : "OziExplorer Map Files (*.map) on CD" *Trans* : " Text : "Map Features and Comments from Map File" *Trans* : " Text : "Print" *Trans* : "Drukuj Text : "Print Waypoint List" *Trans* : "Drukuj listę punktów Text : "Print Event List" *Trans* : " Text : "Print Route List" *Trans* : "Drukuj listę tras Text : "Print Map Image" *Trans* : "Drukuj obraz mapy Text : "Save Map to Image File" *Trans* : "Zapisz mapę do pliku graficznego Text : "Color Image" *Trans* : " Text : "Black && White Image (2 colors Dithered)" *Trans* : " Text : "Run Img2Ozf program" *Trans* : " Text : "Customize Toolbar" *Trans* : "Dostosuj pasek narzędziowy Text : "Assign Function Keys" *Trans* : "Przypisz klawisze funkcyjne Text : "Quit application" *Trans* : "Wyjdź z programu Text : "Select" *Trans* : "Wybierz Text : "Selection Control" *Trans* : " Text : "Select Waypoints" *Trans* : "Wybierz punkty Text : "Select Events" *Trans* : " Text : "Select Nearest Waypoints" *Trans* : "Wybierz najbliższe punkty Text : "Invert Selection" *Trans* : "Odwróć zaznaczenie Text : "Delete Selected Objects" *Trans* : "Usuń wybrane obiekty Text : "Save Selected Objects" *Trans* : "Zapisz wybrane obiekty Text : "Copy Map Screen to Clipboard" *Trans* : "Kopiuj mapę z ekranu do schowka Text : "View" *Trans* : "Podgląd Text : "Main Toolbar" *Trans* : "Główny pasek narzędziowy Text : "User Toolbar" *Trans* : "Pasek narzędziowy użytkownika Text : "Zoom Window" *Trans* : "Okno zoom Text : "Map View" *Trans* : "Podgląd mapy Text : "Hide " *Trans* : "Ukryj Text : "Waypoints" *Trans* : "Punkty docelowe Text : "Events" *Trans* : " Text : "Map Features" *Trans* : " Text : "Map Comments" *Trans* : " Text : "All Map Objects" *Trans* : "Wszystkie obiekty na mapie Text : "UnHide" *Trans* : "Odkryj Text : "Lists" *Trans* : "Listy Text : "Waypoint List" *Trans* : "Lista punktów Text : "Map Feature List" *Trans* : " Text : "Map Comment List" *Trans* : " Text : "Distance Between Waypoints" *Trans* : "Odległość pomiędzy dwoma punktami Text : "Distance Display" *Trans* : " Text : "Route Editor" *Trans* : "Edytor tras Text : "Show Routes on Map" *Trans* : "Pokaż trasy na mapie Text : "Track Control" *Trans* : " Text : "Track Replay Control" *Trans* : " Text : "Track Move Control" *Trans* : " Text : "Track Filter Control" *Trans* : " Text : "Track Profile" *Trans* : " Text : "Track 3D" *Trans* : " Text : "Show tracks on Map" *Trans* : "Pokaż ślady na mapie Text : "Point Control" *Trans* : " Text : "Show Points on Map" *Trans* : " Text : "Simulated GPS" *Trans* : "Symulowany GPS Text : "Blank Map (Auto Scale)" *Trans* : "Pusta mapa (Autoskala) Text : "Rescale Blank Map" *Trans* : "Przeskaluj pustą mapę Text : "Blank Map Grid" *Trans* : "Siatka na pustej mapie Text : "10 Degrees" *Trans* : " Text : "5 Degrees" *Trans* : " Text : "2 Degrees" *Trans* : " Text : "1 Degree" *Trans* : " Text : "30 Minutes" *Trans* : " Text : "15 Minutes" *Trans* : " Text : "10 Minutes" *Trans* : " Text : "5 Minutes" *Trans* : " Text : "2 Minutes" *Trans* : " Text : "1 Minute" *Trans* : " Text : "Grid Line Setup" *Trans* : " Text : "Clear All Waypoints from Map" *Trans* : "Usuń wszystkie punkty z mapy Text : "Clear All Events from Map" *Trans* : " Text : "Clear Route Data from Map" *Trans* : "Usuń dane trasy z mapy Text : "Clear All Tracks from Map" *Trans* : "Usuń wszystkie ślady z mapy Text : "Clear All Points from Map" *Trans* : " Text : "Clear All of Above" *Trans* : "Usuń wszystko Text : "Add Map Object or Drag Map" *Trans* : " Text : "Map Feature" *Trans* : " Text : "Map Comment" *Trans* : " Text : "Track Point" *Trans* : "Punkt śladu Text : "Mark" *Trans* : "Zaznacz Text : "Drag Map" *Trans* : " Text : "Find Maps ....." *Trans* : "Znajdź mapy .... Text : "From Entered Position" *Trans* : " Text : "At Current Position" *Trans* : " Text : "To the North" *Trans* : " Text : "To the South" *Trans* : " Text : "To the East" *Trans* : " Text : "To the West" *Trans* : " Text : "Lock to Current map Path" *Trans* : " Text : "Save Map Position" *Trans* : "Zapisz pozycję na mapie Text : "Move Map Calibration" *Trans* : "Przesuń kalibrację mapy Text : "Datum Shift" *Trans* : " Text : "Name Search" *Trans* : "Szukanie nazw Text : "Night Vision" *Trans* : "Praca w nocy Text : "Set Intensity" *Trans* : "Ustaw intensywność Text : "75%" *Trans* : " Text : "50%" *Trans* : " Text : "25%" *Trans* : " Text : "Project New Waypoint" *Trans* : " Text : "Write TFW File" *Trans* : " Text : "Moving Map Control" *Trans* : " Text : "Show GPS Fix Data" *Trans* : " Text : "Start NMEA Communication with GPS" *Trans* : " Text : "Stop NMEA Communication with GPS" *Trans* : " Text : "Ignore NMEA Valid Data Flag" *Trans* : " Text : "Show NMEA Input && Output" *Trans* : " Text : "NMEA Simulator" *Trans* : " Text : "Automatically Scroll Map" *Trans* : "Automatycznie przewijaj mapę Text : "Range Rings Setup" *Trans* : " Text : "Clear Track Log File (mmTrack.plt)" *Trans* : " Text : "Set Waypoint at Position" *Trans* : " Text : "Attach Cursor Line to Position" *Trans* : " Text : "Show Regional Map Window" *Trans* : " Text : "Navigation Control" *Trans* : " Text : "Navigate To ....." *Trans* : " Text : "Along a Route" *Trans* : "Wzdłuż trasy Text : "Waypoint from a List" *Trans* : "Punkt z listy Text : "Cancel Navigation" *Trans* : "Anuluj nawigację Text : "View Waypoint Proximity Zones" *Trans* : " Text : "Lowrance " *Trans* : " Text : "Merge Waypoints from GPS" *Trans* : " Text : "Merge Events from GPS" *Trans* : " Text : "Get Waypoints from GPS" *Trans* : "Pobierz punkty z GPS-u Text : "Get Events from GPS" *Trans* : " Text : "Get Track from GPS" *Trans* : "Pobierz ślady z GPS-u Text : "Get Routes from GPS" *Trans* : "Pobierz trasy z GPS-u Text : "Delete "UnReserved" Waypoints from GPS" *Trans* : " Text : "Delete "Reserved" Waypoints from GPS" *Trans* : " Text : "Clear Routes from GPS" *Trans* : "Usuń trasy z GPS-u Text : "Send WayPoints to GPS" *Trans* : "Wyślij punkty do GPS-u Text : "Send Events to GPS" *Trans* : " Text : "Send Track to GPS" *Trans* : "Wyślij ślady do GPS-u Text : "Send Routes to GPS" *Trans* : "Wyślij trasy do GPS-u Text : "Get Track from GDM (via Clipboard)" *Trans* : " Text : "Send Track to GDM (via Clipboard)" *Trans* : " Text : "Send Waypoints to GPS" *Trans* : "Wyślij punkty do GPS-u Text : "Text File Support" *Trans* : "Plik tekstowy Text : "Get Waypoints from WP+ Text File" *Trans* : " Text : "Get Track from WP+ Text File" *Trans* : " Text : "Save Waypoints to WP+ Text File" *Trans* : " Text : "Save Track to WP+ Text File" *Trans* : " Text : "PCX5 Support" *Trans* : " Text : "Get Waypoints from GRM File" *Trans* : " Text : "Get Track from GRM File" *Trans* : " Text : "Save Waypoints to WPT File" *Trans* : " Text : "Save Track to TRK File" *Trans* : " Text : "Turn Off GPS" *Trans* : "Wyłącz GPs Text : "Get Almanac from GPS" *Trans* : "Pobierz almanach z GPS-u Text : "Show GPS Protocol Info" *Trans* : "Pokaż informacje o protokole GPS Text : "Delete from GPS" *Trans* : "Usuń z GPS-u Text : "All Waypoints" *Trans* : "Wszystkie punkty Text : "All Routes" *Trans* : "Wszystkie trasy Text : "The Track" *Trans* : " Text : "All Saved Fixes" *Trans* : " Text : "DataSend POI Manager" *Trans* : " Text : "Import Waypoints from Lowrance Software" *Trans* : " Text : "Import Events from Lowrance Software" *Trans* : " Text : "Export Waypoints to Lowrance Software" *Trans* : " Text : "Export Events to Lowrance Software" *Trans* : " Text : "Get Track from GPS (fast method)" *Trans* : " Text : "Get Track from GPS (nmea method)" *Trans* : " Text : "GPS - NMEA Only" *Trans* : " Text : "Send Waypoints to GPS Using $GPWPL NMEA Sentence" *Trans* : " Text : "Get Waypoints from GPS Using $GPWPL NMEA Sentence" *Trans* : " Text : "MapCreate" *Trans* : " Text : "OziMC Feature Edit" *Trans* : " Text : "OziMC Configuration" *Trans* : " Text : "&Help" *Trans* : "Pomoc Text : "Help Contents" *Trans* : "Zawartośc pomocy Text : "Tutorial (Demonstration Data)" *Trans* : "Przewodnik (dane przykladowe) Text : "Program History" *Trans* : "Historia programu Text : "Frequently Asked Questions" *Trans* : "Najczęściej Zadawane Pytania Text : "Conditions of Use" *Trans* : "Warunki używania Text : "Startup Information" *Trans* : "Informacje początkowe Text : " &About..." *Trans* : "O programie Text : "Registration Information" *Trans* : "Rejstracja Text : "Upgrade Information" *Trans* : "Aktualizacje Text : "Registration Notice" *Trans* : "Uwaga o rejstracji Text : "Enter Registration Code" *Trans* : "Wpisz kod rejstracyjny Text : "OziMC Help" *Trans* : " Text : "OziMC Registration" *Trans* : " Text : "RIK Support Help" *Trans* : " Text : "RIK Registration" *Trans* : " Text : "MultiTrack" *Trans* : " Text : "Start Tracking" *Trans* : " Text : "Stop Tracking" *Trans* : " Text : "Close Menu" *Trans* : "Zamknij menu Text : "Open File Attachment" *Trans* : " Text : "Hide" *Trans* : "Ukryj Text : "Find Map" *Trans* : "Znajdź mapę Text : "Navigate To ..." *Trans* : "Nawiguj do ... Text : "Delete && Split track" *Trans* : " Text : "Send to GPS" *Trans* : "Wyślij do GPS-u Text : "Create a Map Feature at Wp" *Trans* : " Text : "Create a Track Point at Wp" *Trans* : " Text : "New Track Section" *Trans* : " Text : "Snap to Closest Track Point" *Trans* : "Przyciągnij do najbliższego punktu śladu Text : "Snap to Closest Track Line" *Trans* : " Text : "Load Map File" *Trans* : "Wczytaj plik mapy Text : "Open Recent Maps" *Trans* : "Otwórz ostatnio używane Text : "Clear Recent Maps List" *Trans* : "Wyczyść listę ostatnio używanych Text : "Load Waypoints from File" *Trans* : "Wczytaj punkty z pliku Text : "Load Events from File" *Trans* : " Text : "Load Track from File (Multi)" *Trans* : "Wczytaj ślad z pliku (Multi) Text : "Load Routes from File" *Trans* : "Wczytaj trasy z pliku Text : "Load Points from File" *Trans* : " Text : "Load Points from Points File (Multi)" *Trans* : " Text : "Load Points from Waypoint File" *Trans* : " Text : "Load Points from Track File" *Trans* : " Text : "Append Waypoints from File" *Trans* : "Dołącz punkty z pliku Text : "Append Visible Waypoints from File" *Trans* : "Dołącz widzialne punkty z pliku Text : "Append Events from File" *Trans* : " Text : "Append Track from File" *Trans* : "Dołącz ślad z pliku Text : "Import Waypoints from Text File" *Trans* : "Importuj punkty z pliku tekstowego Text : "Track from Text File" *Trans* : "Ślad z pliku tekstowego Text : "From MapInfo MIF Files" *Trans* : " Text : "From MapGen Vector Files" *Trans* : " Text : "From ArcInfo E00 Files" *Trans* : " Text : "From IGC Track Files" *Trans* : " Text : "From Compe-Gps Track Files" *Trans* : " Text : "Import ESRI Shape File" *Trans* : " Text : "Polylines && Polygons" *Trans* : " Text : "Save Map File" *Trans* : "Zapisz plik mapy Text : "Save WayPoints to File" *Trans* : "Zapisz punkty do pliku Text : "Save Events to File" *Trans* : " Text : "Save Track to File" *Trans* : "Zapisz ślad do pliku Text : "Save Routes to File" *Trans* : "Zapisz trasy do pliku Text : "Save Points to File" *Trans* : " Text : "Save Points to Points File" *Trans* : " Text : "Save Points to Waypoint File" *Trans* : " Text : "Save Waypoints to Points File" *Trans* : " Text : "Export Waypoints to Text File" *Trans* : "Eksportuj punkty do pliku tekstowego Text : "Export Track" *Trans* : "Eksportuj ślad Text : "To Text File" *Trans* : "Do pliku tekstowego Text : "To IGC Track File" *Trans* : " Text : "Export to ESRI Shape File" *Trans* : " Text : "Point Set 1 to Points" *Trans* : " Text : "Waypoints to Points" *Trans* : " Text : "Tracks to Polylines" *Trans* : " Text : "Refresh Screen" *Trans* : "Odśwież ekran Text : "Zoom Full Map" *Trans* : " Text : "Zoom 50%" *Trans* : " Text : "Zoom 100%" *Trans* : " Text : "Zoom 200%" *Trans* : " Text : "Find Map at Cursor" *Trans* : " Text : "Show Compass at Cursor" *Trans* : " Text : "Close map" *Trans* : "Zamknij mapę Text : "France Zone I" *Trans* : " Text : "France Zone II" *Trans* : " Text : "France Zone III" *Trans* : " Text : "France Zone IV" *Trans* : " Text : "Degrees && Mins && Secs" *Trans* : " ; Text : "Map Advanced Options" *Trans* : "Zaawansowane opcje mapy Text : " Attach Files to Map " *Trans* : "Dołącz pliki do mapy Text : "All files (*.plt,*.wpt,*.evt,*.rte)|*.plt;*.wpt;*.evt;*.rte;*.pnt|Track files (*.plt)|*.plt|Waypoint files (*.wpt)|*.wpt|Event files (*.evt)|*.evt|Route files (*.rte)|*.rte|Point Fle (*.pnt)|*.pnt" *Trans* : " Text : "Select File" *Trans* : "Wybierz plik Text : "Press to select File" *Trans* : "Naciśnij aby wybrać plik Text : " " *Trans* : " Text : "Add the File name to the list" *Trans* : " Text : "Add" *Trans* : "Dodaj Text : "Remove the File name from the list" *Trans* : "Usuń nazwę pliku z listy Text : "Remove" *Trans* : "Usuń Text : " Moving Map " *Trans* : "Ruchoma mapa Text : "Include in" *Trans* : " Text : "Use a non-linear Polynomial Calibration for Map'#13#10'if number of Calibration points is 7 or more" *Trans* : "Użyj nieiniowej kalibracji wielomianowej dla mapy'#13#13'jeśli liczba punktów kalibracyjnych przekracza 7 Text : "Use Polynomial Calibration for Map" *Trans* : "Użyj wielomianowej kalibracji dla mapy Text : " BSB Calibration " *Trans* : " Text : "Use Manufacturers" *Trans* : " Text : "Use OziExplorers" *Trans* : " ; Text : "Easting and Northing Adjustment" *Trans* : " Text : " Adjustment " *Trans* : "Regulacja Text : "Adjust Lowrance map data in x and y direction" *Trans* : " Text : "xAdjust" *Trans* : " Text : "yAdjust" *Trans* : " ; Text : "Panel1" *Trans* : " Text : "Main" *Trans* : " Text : " MapCreate File Paths " *Trans* : " Text : "MapCreate Software Path" *Trans* : " Text : "MapCreate File Drive" *Trans* : " Text : "Memory Buffer Size" *Trans* : " ; Text : "OziMC Feature Edit - Beta Version 1.25" *Trans* : " Text : "Polygon not selected for Editing" *Trans* : " Text : "View current GPS Map Data after Processing'#13#10'The map Data is saved before viewing" *Trans* : " Text : "View GPS background Map Data" *Trans* : " Text : "View GPS SmartMap Data - only in USA'#13#10'Just for Fun - no editing yet" *Trans* : " Text : "Refresh Views for new polygon" *Trans* : " Text : "Delete Track Points Outside Polygon" *Trans* : " Text : "Click to Highlight Feature'#13#10'Double Click to View Feature" *Trans* : " Text : " Map Types " *Trans* : " Text : "World Maps" *Trans* : " Text : "Smart Maps " *Trans* : " Text : "Ozi SM" *Trans* : " Text : "Open the Feature Data for Editing" *Trans* : " Text : "Edit" *Trans* : " Text : "Save the Feature Data to Disk" *Trans* : " Text : "Hide Window" *Trans* : "Ukryj okno Text : "Cancel Editing the Feature Data" *Trans* : " Text : "Cancel Edit" *Trans* : "Anuluj edycję Text : "Refresh Feature List" *Trans* : " Text : "Set Easting and Northing Adjustment" *Trans* : " Text : "Adjust" *Trans* : " Text : "Number of Polygons to East and West" *Trans* : " Text : "Cols" *Trans* : "Kolumn Text : "Number of Polygons to North and South" *Trans* : " Text : "Rows" *Trans* : "Wierszy ; Text : "Change Map Image Location" *Trans* : "Zmień położenie obrazu mapy Text : " Change Map Image File for Current Map " *Trans* : " Text : "From : " *Trans* : "Z: Text : "Image files |*.tif;*.bmp;*.kap;*.nos;*.jpg;*.png;*.gif;*.ozf;*.ozf2;*.hdr;*.rml;*.ecw" *Trans* : " Text : "Change To" *Trans* : "Zmień na Text : "Change and Save the Image File Path for the Current Map" *Trans* : " Text : "Save Map" *Trans* : "Zapisz mapę Text : " Change Image File Path for All Maps in Selected Folder " *Trans* : " Text : "Change Image Path To" *Trans* : " Text : "For All Maps Here" *Trans* : "Dla wszystkich map Text : "Change the Image File Path for All maps in Specified Path" *Trans* : " Text : "Change and Save Maps" *Trans* : "Zmień i zapisz mapy Text : " Change the Drive Identifier in the Image File Path for All Maps in Selected Folder " *Trans* : " Text : "Change Image Drive To" *Trans* : "Zmień dysk na ; Text : "Maptech Map Import" *Trans* : " ; Memo : "Use the Image File Path Combo box above to select the Path (Drive " Memo : "and Folder) where the image files of the maps reside - this may be a " Memo : "CD or Hard Disk. The Map Images have a .HDR or .RML extension." Memo : "" Memo : "Use the Map File Path to specify where the imported maps are to be " Memo : "placed - note : new folders can be created." Memo : "" Memo : "After selecting the Paths press the Import button to proceed." *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans??: " *Trans??: " ; Text : "Very Small" *Trans* : " Text : "Small" *Trans* : " Text : "Medium" *Trans* : " Text : "Large" *Trans* : " Text : "Show Corner Markers" *Trans* : " ; Text : "Draw Box to Select Waypoints" *Trans* : " Text : "Draw Box to Select Events" *Trans* : " Text : "Save Selected Objects to New File" *Trans* : " Text : "Invert the Selection" *Trans* : " ; Text : "Delete the Selected Map Comment" *Trans* : " Text : "Close the Map Comment List" *Trans* : " Text : "Select all Map Comments which do not plot within the boundaries of the current Map'#13#10'The Map Comments are shown with "No" in the On Map column'#13#10'After selecting they can then be deleted if desired" *Trans* : " Text : "Edit Properties of the Selected Map Comment" *Trans* : " Text : "Find Map for Selected Map Comment" *Trans* : " Text : "Plot Location of Selected Map Comment on Current Map" *Trans* : " ; Text : "Map Comment Properties" *Trans* : " Text : " Dimensions " *Trans* : "Rozmiary Text : "Width" *Trans* : "Szerokość Text : "Height" *Trans* : "Wysokość Text : " Colors " *Trans* : "Kolory Text : "Comment" *Trans* : "Komentarz Text : "Save the Changes into Memory" *Trans* : "Zapisz zmiany w pamięci Text : "Cancel and Close the Window" *Trans* : "Anuluj i zamknij okno Text : " How it will Look " *Trans* : "Jak będzie wyglądać Text : "Map Comment 100" *Trans* : " Text : "Small Fonts" *Trans* : " Text : " Font " *Trans* : " Text : "Bold" *Trans* : " Text : "Make Current Settings the Default for New Map Comments" *Trans* : " ; Text : "Merge Events" *Trans* : " Text : " Merge By " *Trans* : " Text : " Discard " *Trans* : " Text : "If Not on the Map" *Trans* : " ; Text : "Merge Waypoints" *Trans* : " Text : "If Map Feature WP" *Trans* : " ; Text : "Symbol Name" *Trans* : " Text : "Delete the Selected Map Features" *Trans* : " Text : "Close the Map Feature List" *Trans* : " Text : "Select all Map Features which do not plot within the boundaries of the current Map'#13#10'The Map Features are shown with "No" in the On Map column'#13#10'After selecting they can then be deleted if desired" *Trans* : " Text : "Edit Properties of the Selected Map Feature" *Trans* : " Text : "Find Map for Selected Map Feature" *Trans* : " Text : "Plot Location of Selected Map Feature on Current Map" *Trans* : " ; Text : "Map Feature Properties" *Trans* : " Text : "Select a Symbol from the List" *Trans* : " Text : "Symbol ..." *Trans* : " Text : "Remove the Symbol from the Map Feature" *Trans* : " Text : "Remove Attached File" *Trans* : " Text : "Create Waypoint" *Trans* : " Text : "Feature Name" *Trans* : " Text : "Picture" *Trans* : " Text : "Double Click to open image as an attachment" *Trans* : " Text : "All files (*.*)|*.*|Html Files (*.htm;*.html)|*.htm;*.html|Image Files (*.bmp,*.jpg)|*.bmp;*.jpg|Image Files (*.gif,*.bmp,*.jpg,*.tif,*.png)|*.gif;*.bmp;*.jpg;*.tif;*.png|Doc Files (*.doc)|*.doc|Text Files (*.txt)|*.txt" *Trans* : " Text : "File Attachment" *Trans* : " Text : "Wp Name" *Trans* : " Text : "Make the Current Symbol the Default for All New Map Features" *Trans* : " Text : "Pictures (*.jpg,*.bmp)|*.jpg;*.bmp" *Trans* : " ; Text : "Speed" *Trans* : " Text : "Alt" *Trans* : " Text : "Mag" *Trans* : " Text : "Start/Stop NMEA Communication with the GPS for Moving Map Display" *Trans* : " Text : "Start" *Trans* : " Text : "V" *Trans* : " Text : "Show the Help" *Trans* : " Text : "Reduce/Expand Control Window" *Trans* : " Text : "Check for More Detailed Map" *Trans* : " Text : "Find Maps at GPS Position" *Trans* : " Text : "Moving Map looks for Maps only in the '#13#10'Folder of the currently loaded map" *Trans* : " Text : "Automatically Scroll Map to keep Position in View" *Trans* : " Text : "UR" *Trans* : " Text : "Track Update Interval" *Trans* : " Text : "TI" *Trans* : " Text : "Track Tail Length'#13#10'Set to 0 to show all Points" *Trans* : " Text : "TT" *Trans* : " Text : "Map Scroll Method" *Trans* : " Text : "SM" *Trans* : " ; Text : "Direction (degrees)" *Trans* : " Text : "0 deg" *Trans* : " Text : "-10" *Trans* : " Text : "+" *Trans* : " Text : "+10" *Trans* : " Text : "-20" *Trans* : " Text : "+20" *Trans* : " Text : "Position and Start Moving Map from here" *Trans* : " Text : "Here" *Trans* : " ; Text : "Image Files (BMP,TIF,JPG,PNG,KAP,OZF,ECW)|*.BMP;*.TIF;*.JPG;*.PNG;*.KAP;*.NOS;*.GIF;*.OZF;*.RML;*.HDR;*.OZF2;*.ECW|All Files (*.*)|*.*" *Trans* : " Text : "Image Files (*.bmp,*.png)|*.bmp;*.png" *Trans* : " Text : "Save Map to Bitmap File" *Trans* : "Zapisz mapę do bitmapy Text : "Text Files (*.txt)|*.txt|All Files (*.*)|*.*" *Trans* : " Text : "Export Track Points as Text File" *Trans* : "Eksportuj punkty śladu jako plik tekstowy Text : "Export Waypoints as Text File" *Trans* : " Text : "Track Files (*.plt)|*.plt" *Trans* : " Text : "Save Track File" *Trans* : " Text : "Event Files (*.evt)|*.evt" *Trans* : " Text : "Save Event File" *Trans* : " Text : "Import Text File" *Trans* : "Importuj plik tekstowy Text : "Image Files (*.TIF,*.BMP,*.JPG,*.PNG)|*.BMP;*.TIF;*.JPG;*.PNG" *Trans* : " Text : "WayPoint Files (*.wpt)|*.wpt" *Trans* : " Text : "Save Waypoint File" *Trans* : "Zapisz plik punktów Text : "Load Waypoint File" *Trans* : "Wczytaj plik punktów Text : "Load Event File" *Trans* : " Text : "Load Track File (Multi Select)" *Trans* : " Text : "Route Files (*.rte)|*.rte" *Trans* : " Text : "Save Route File" *Trans* : "Zapisz plik tras Text : "Load Route File" *Trans* : "Wczytaj plik tras Text : "Lowrance Files (*.lwr,*.low)|*.lwr;*.low" *Trans* : " Text : "Import Waypoint File" *Trans* : "Importuj plik z punktami Text : "Export Waypoint File" *Trans* : " Text : "PCX5 Files (*.grm,*.wpt,*.trk)|*.grm;*.wpt;*.trk|All Files (*.*)|*.*" *Trans* : " Text : "Import PCX5 File" *Trans* : " Text : "PCX5 Files (*.grm)|*.grm" *Trans* : " Text : "Export PCX5 File" *Trans* : " Text : "BSB Files (*.kap)|*.kap;*.nos" *Trans* : " Text : "Shape Files (*.shp)|*.shp" *Trans* : " Text : "Export Shape File" *Trans* : " Text : ".dbf" *Trans* : " Text : "Point Files (*.pnt)|*.pnt" *Trans* : " Text : "Load Point File (Multi Select)" *Trans* : " Text : "IGC Track Files (*.igc)|*.igc|All Files (*.*)|*.*" *Trans* : " Text : "Export to IGC Track File" *Trans* : " Text : "Load IGC Track File" *Trans* : " Text : "Compe-Gps Track Files (*.trk)|*.trk|All Files (*.*)|*.*" *Trans* : " Text : "Load Compe-Gps Track File" *Trans* : " ; Text : "Track Number to Replay" *Trans* : " Text : "Move Units" *Trans* : " Text : "Save The Map with the New Calibration and Exit" *Trans* : " Text : "Revert Calibration to state of last Save Map operation and Exit" *Trans* : " ; Text : "Target Properties" *Trans* : " Text : "Vehicle Id" *Trans* : " Text : "Change the Symbol for this Vehicle" *Trans* : " Text : "Vehicle Name" *Trans* : " Text : "Track Vehicle" *Trans* : " ; Text : "Target Symbol" *Trans* : " ; Text : "MultiTrak" *Trans* : " Text : "Active Vehicle ID" *Trans* : " Text : "Start/Stop Tracking" *Trans* : " Text : "Stop" *Trans* : " Text : "Tr" *Trans* : " Text : "Adjust vehicle properties" *Trans* : " Text : "Stop Tracking and Close the MultiTrak Window" *Trans* : " Text : "Delete the Selected Vehicle" *Trans* : " ; Text : "OziExplorer Shareware" *Trans* : " Text : "This is an Unregistered Copy !!!" *Trans* : "To jest wersja niezarejstrowana Text : "Ozi" *Trans* : " Text : "Explorer" *Trans* : " Text : "OziExplorer is Shareware" *Trans* : " Text : "The cost to register is $85.00 US or equivalent (may change)" *Trans* : "Koszt rejstracji wynosi USA$85.00 lub równowartość (może ulec zmianie) Text : "http://www.oziexplorer.com" *Trans* : " Text : "Contact Des Newman or check the Web page for details" *Trans* : "Skontaktuj się z Des Newman'em lub zajrzyj na stronę WWW Text : "Please check the Web page for latest price" *Trans* : "Na stronie WWW znajdziesz aktualny cennik ; Text : "Advanced Name Search" *Trans* : "Zaawansowane szukanie Text : "Click on Map or enter Latitude and Longitude" *Trans* : "Kliknij na mapie albo wprowadź długośc i szerokość geograficzną Text : "Search for Place Names within the Specified Radius" *Trans* : "Szukaj miejsca w obrębie określonego promienia Text : "Search" *Trans* : "Szukaj Text : "Plot Distance Circle on the Map" *Trans* : "Wykreśl koło odległości na mapie Text : "Draw" *Trans* : "Rysuj Text : "Fill the Distance Circle with Hatching" *Trans* : "Wypełnij koło odległości kreskowaniem Text : "Hatch" *Trans* : "Kreskuj ; Text : "Load a Names Database" *Trans* : "Wczytaj bazę danych Text : "Name to Find" *Trans* : "Nazwa do znalezienia Text : "All Codes" *Trans* : "Wszystkie kody Text : "Feature Code" *Trans* : " Text : "Plot the location of the selected place on the Map" *Trans* : "Zaznacz położenie wybranego miejsca na mapie Text : "Clear the Name to Find Field" *Trans* : "Wyczyść pole nazwy do znalezienia Text : "Find Maps that contain the location of the selected place" *Trans* : "Znajdź mapy zawierające wybrane miejsce Text : "Show only places on currently loaded map" *Trans* : "Pokaż jedynie miejsca na aktualnie wczytanej mapie Text : "Dock Name Search window to edge of Window" *Trans* : "Umieść okno Szukania Nazw przy krawędzi Text : "Dock" *Trans* : "Dokuj Text : "Load Name Database" *Trans* : "Wczytaj bazę danych nazw Text : "Search from left characters only" *Trans* : " Text : "Left" *Trans* : " Text : "Create a Waypoint at the Selected Location" *Trans* : "Utwórz punkt w wybranym miejscu Text : "Clear the Feature Code" *Trans* : " Text : "Advanced Search" *Trans* : "Zaawansowane szukanie Text : "Plot Name location as points on the Map'#13#10'Press again to Abort" *Trans* : " Text : "NAME" *Trans* : "NAZWA Text : "Place Name" *Trans* : "Nazwa miejsca Text : "FULL_CODE" *Trans* : " Text : "LGA" *Trans* : " Text : "Local Government Authority" *Trans* : " Text : "TDbf_garlic v4.006" *Trans* : " Text : "C" *Trans* : " Text : "F_CODE" *Trans* : " Text : "LATITUDE" *Trans* : " Text : "LONGITUDE" *Trans* : " Text : "MSHT" *Trans* : " Text : "F_CODE2" *Trans* : " Text : "names.dbf" *Trans* : " Text : "c:\ozicompile\" *Trans* : " Text : "Name Database (*.names)|*.names" *Trans* : "Baza danych nazw (*.names)|*.names Text : "Open Name Database" *Trans* : "Otwórz bazę danych nazw ; Text : "Next Wp" *Trans* : " Text : "CTS" *Trans* : " Text : "XTE" *Trans* : " Text : "ETE" *Trans* : " Text : "ETA" *Trans* : " Text : "Show Details of Active Route" *Trans* : "Pokaż szczegóły aktywnej trasy Text : "More Information ..." *Trans* : "Więcej informacji... Text : "..." *Trans* : " Text : "Navigate Along a Route" *Trans* : "Nawiguj wzdłuż trasy Text : "Navigate to a Waypoint" *Trans* : "Nawiguj do punktu ; Text : "From Waypoint" *Trans* : "Z punktu Text : "Refresh Waypoint List" *Trans* : "Odśwież listę punktów ; Text : "NMEA Input and Output - Right click on Window for Menu" *Trans* : " Text : "Courier New" *Trans* : " Text : "Pause" *Trans* : " Text : "Input && Output" *Trans* : " Text : "Input Only" *Trans* : " Text : "Output Only" *Trans* : " Text : "$GPRMC Input Only" *Trans* : " ; Text : "Waypoint Properties" *Trans* : "Właściwości punktu Text : "Waypoint Symbol" *Trans* : "Symbol punktu Text : "Show the Edit Position Dialog" *Trans* : "Pokaż okno edycji pozycji Text : "Bottom" *Trans* : "Poniżej Text : "Top" *Trans* : "Powyżej Text : "Right" *Trans* : "Na prawo Text : "Pointer Direction" *Trans* : "Kierunek wskaźnika Text : "Show the Edit Date Dialog" *Trans* : "Pokaż okno edycji daty Text : "Edit Date" *Trans* : "Edytuj datę Text : "Proximity Distance" *Trans* : "Odległość zbliżeniowa Text : "Make Current Settings the Default for All New Waypoints" *Trans* : "Ustaw aktualne ustalenia jako domyślne dla nowych punktów ; Text : "Enter Registration Key" *Trans* : "Wprowadź kod rejstracyjny Text : "Note : The $ character must be entered with the Key code" *Trans* : "Uwaga: Znak $ musi zostać wprowadzony razem z kodem Text : "User Name or Serial No." *Trans* : "Nazwa użytkownika lub numer seryjny Text : "Key Code#" *Trans* : "Kod# ; Text : "Albers Equal Area Projection Setup" *Trans* : " Text : "Latitude 2" *Trans* : " Text : "Latitude 1" *Trans* : " Text : "Central Meridian" *Trans* : " Text : "Origin Latitude" *Trans* : " ; Text : "Lambert Projection CC Setup" *Trans* : " ; Text : "Polyconic Setup" *Trans* : " Text : "Minute" *Trans* : " ; Text : "Robinson Setup" *Trans* : " ; Text : "Sinusoidal Setup" *Trans* : " ; Text : "Transverse Mercator Setup" *Trans* : " Text : "Latitude Origin" *Trans* : " Text : "(User Grid)" *Trans* : " Text : "Scale Factor" *Trans* : " Text : "Select a Standard Grid from this List'#13#10'or Enter Grid Parameters" *Trans* : " Text : "------------------------------" *Trans* : " Text : "Std Grids" *Trans* : " ; Text : "User Grid Setup" *Trans* : " ; Text : "Bonne Projection" *Trans* : " ; Text : "Lambert AEE Projection" *Trans* : " ; Text : "Space Oblique M. (LANDSAT)" *Trans* : " Text : "Satellite Number" *Trans* : " Text : "Path Number" *Trans* : " ; Text : "Van Der Grinten Projection" *Trans* : " Text : "Min" *Trans* : " ; Text : "Vertical Near Sided Projection" *Trans* : " Text : "Height of View Point" *Trans* : " ; Text : "Wagner IV Projection" *Trans* : " ; Text : "Specify Track Number" *Trans* : " Text : "Track Number" *Trans* : " ; Text : "DataSend Path" *Trans* : " Text : "Group" *Trans* : " Text : "Add a New Group of POI'#39's" *Trans* : " Text : "New" *Trans* : " Text : "Add a New POI Name (set)" *Trans* : " Text : "Priority" *Trans* : " Text : "Owner" *Trans* : " Text : "Add a New POI Owner" *Trans* : " Text : "Sort POI'#39's Alphabetically" *Trans* : " Text : "Sort" *Trans* : " ; Text : "Change Priority" *Trans* : " Text : "The Priority determines the drawing priority on the DataSend map display. A priority of 1 shows on top of all other POI'#39's displayed on the map." *Trans* : " Text : "Priority 1..255" *Trans* : " ; Text : "All Points are made Inactive" *Trans* : " Text : "Use Mouse to draw a box around Points'#13#10'All Points within the box are made Active" *Trans* : " Text : "Reduce/Expand Point Control Window" *Trans* : " Text : "More Options for Active track Points" *Trans* : " Text : "All New Points are created Active" *Trans* : " Text : "Move Point Set Up in the List to a Lower Number" *Trans* : " Text : "Move Point Set Down in the List to Higher Number" *Trans* : " Text : "Selected Point Set Properties" *Trans* : " Text : "Open Properties Dialog when Creating New Points" *Trans* : " Text : "Append Point Sets Together" *Trans* : " Text : "Save the Selected Point Set" *Trans* : " Text : "Decrease Size of Window" *Trans* : " Text : "Increase Size of Window" *Trans* : " Text : "Show Point List" *Trans* : " Text : "Num" *Trans* : " Text : "Save Active Points to a File" *Trans* : " Text : "Delete Active Points" *Trans* : " ; Text : "Point List" *Trans* : " Text : "PID" *Trans* : " Text : "Aux1" *Trans* : " Text : "Aux2" *Trans* : " Text : "Aux3" *Trans* : " Text : "Rotation" *Trans* : " Text : "Delete the Selected Track Points" *Trans* : " Text : "Select all Track Points which do not plot within the boundaries of the current Map'#13#10'The Track Points are shown with "No" in the On Map column'#13#10'After selecting they can then be deleted if desired" *Trans* : " Text : "Close the Track Point List" *Trans* : " Text : "Find Map for Selected Point" *Trans* : " Text : "Plot Location of Selected Point on Current Map" *Trans* : " Text : "Save Selected Track Points to File" *Trans* : " Text : "Selection Functions" *Trans* : " Text : "Select None" *Trans* : " Text : "Select All" *Trans* : " ; Text : "Point Set Properties" *Trans* : " Text : "Show/Hide this Track on Map" *Trans* : " Text : "Points Desc" *Trans* : " Text : "Load Points From Disk" *Trans* : " Text : "Save Points to Disk" *Trans* : " Text : "Clear this Point Set" *Trans* : " Text : "Name Above" *Trans* : " Text : "Format" *Trans* : " Text : "Circle" *Trans* : " Text : "Ellipse" *Trans* : " Text : "Square" *Trans* : " Text : "Rectangle" *Trans* : " Text : "Triangle" *Trans* : " Text : "Style" *Trans* : " ; Text : "POI Symbol" *Trans* : " ; Text : "Print Preview" *Trans* : " ; Text : "Print Map" *Trans* : " Text : "Show Map to Select Area" *Trans* : " Text : " Print Map " *Trans* : " Text : "Window - Fit to Page(s)" *Trans* : " Text : "Window - to Scale" *Trans* : " Text : "Selected - Fit to page(s)" *Trans* : " Text : "Selected - to Scale" *Trans* : " Text : "Map - Fit to Page(s)" *Trans* : " Text : "Map - to Scale" *Trans* : " Text : "Close Printing Window" *Trans* : " Text : "Print the Map" *Trans* : " Text : "Setup the Printer Properties" *Trans* : " Text : "Setup" *Trans* : " Text : "1,000" *Trans* : " Text : "5,000" *Trans* : " Text : "10,000" *Trans* : " Text : "12,000" *Trans* : " Text : "20,000" *Trans* : " Text : "24,000" *Trans* : " Text : "25,000" *Trans* : " Text : "30,000" *Trans* : " Text : "31,680" *Trans* : " Text : "48,000" *Trans* : " Text : "50,000" *Trans* : " Text : "60,000" *Trans* : " Text : "63,360" *Trans* : " Text : "75,000" *Trans* : " Text : "100,000" *Trans* : " Text : "126,720" *Trans* : " Text : "200,000" *Trans* : " Text : "250,000" *Trans* : " Text : "500,000" *Trans* : " Text : "1,000,000" *Trans* : " Text : "1,250,000" *Trans* : " Text : "2,000,000" *Trans* : " Text : "3,000,000" *Trans* : " Text : "4,000,000" *Trans* : " Text : "4,500,000" *Trans* : " Text : "5,000,000" *Trans* : " Text : "10,000,000" *Trans* : " Text : "Scale 1:" *Trans* : " Text : " Orientation " *Trans* : " Text : "Portrait" *Trans* : " Text : "Landscape" *Trans* : " Text : " Map Objects " *Trans* : " Text : "Black && White" *Trans* : " Text : "Do not print the map image just the map objects" *Trans* : " Text : "Do not Print Map Image" *Trans* : " Text : "Route Line (mm)" *Trans* : " Text : " Pages " *Trans* : " Text : "Wide" *Trans* : " Text : "Deep" *Trans* : " Text : "Object Scale" *Trans* : " Text : "Grid Label (mm)" *Trans* : " Text : "Track Line (mm)/unit" *Trans* : " ; Text : "Print Events" *Trans* : " ; Text : "Print Routes" *Trans* : "Drukuj trasy Text : "Routes Available" *Trans* : "Dostępne trasy Text : "Print the Selected Routes" *Trans* : "Drukuj wybrane trasy Text : "Cancel and Close Window" *Trans* : "Anuluj i zamknij okno Text : "Select All Routes" *Trans* : "Wybierz wszystkie trasy ; Text : "Select printing Area" *Trans* : "Wybierz drukowany obszar ; Text : " Include " *Trans* : " ; Text : "Project New Waypoint or Trackpoint" *Trans* : " Text : "Bearing (Degrees)" *Trans* : "Azymut (w stopniach) Text : "Project" *Trans* : " Text : "Projection" *Trans* : " ; Text : "Point Properties" *Trans* : " Text : "Desc 1" *Trans* : " Text : "Desc 2" *Trans* : " Text : "Desc 3" *Trans* : " ; Text : "QuoVadis Navigator Map Import" *Trans* : " Text : "Cal File Path" *Trans* : " ; Memo : "Use the Cal File Path Combo box above to select the Drive and " Memo : "Folder where the calibration files of the maps reside - this may be " Memo : "a CD or Hard Disk. These files have a .CAL extension." Memo : "" Memo : "Use the Map File Path to specify where the imported maps are to be " Memo : "placed - note : new folders can be created." Memo : "" Memo : "After selecting the Paths press the Import button to proceed." *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans??: " *Trans??: " ; Text : "Radius Units" *Trans* : " Text : "Ring Radius" *Trans* : " Text : "Ring Color" *Trans* : " Text : "Number of Rings" *Trans* : " Text : "Rings On" *Trans* : " ; Text : "Regional Map" *Trans* : " Text : "Larger" *Trans* : " ; Text : "Sweden RIK Map Import" *Trans* : " Text : "RIK File Path" *Trans* : " ; Memo : "Use the RIK File Path Combo box above to select the Drive and " Memo : "Folder where the RIK image files of the maps reside - this may be " Memo : "a CD or Hard Disk. These files have a .RIK extension." Memo : "" Memo : "Use the Map File Path to specify where the imported maps are to be " Memo : "placed - note : new folders can be created." Memo : "" Memo : "After selecting the Paths press the Import button to proceed." *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans??: " *Trans??: " ; Text : "Enter Registration Key for RIK Support" *Trans* : " ; Text : "Route Detail" *Trans* : " Text : "L1" *Trans* : " Text : "L2" *Trans* : " Text : "Navigate to this Waypoint" *Trans* : " Text : "Navigate To" *Trans* : " Text : "Wp Num" *Trans* : " Text : "Leg Distance" *Trans* : " Text : "Acc. Distance" *Trans* : " ; Text : "Acc.Distance" *Trans* : " Text : "Move the Waypoint Up in the List" *Trans* : "Przesuń punkt w górę listy Text : "Move" *Trans* : "Przesuń Text : "Move the Waypoint Down in the List" *Trans* : "Przesuń punkt w dół listy Text : "Delete the Waypoint from the Route" *Trans* : "Usuń punkt z Trasy Text : "Clear All Waypoints from the Selected Route" *Trans* : "Wyczyść wszystkie punkty z wybranej trasy Text : "Send the Selected Route to the GPS" *Trans* : "Wyślij wybrane trasy do GPS-u Text : "Send" *Trans* : "Wyślij Text : "Interactively Add Waypoints to Selected Route'#13#10'Position Cursor on Map Waypoint and Press Left Mouse Button" *Trans* : " Text : "Add Wp" *Trans* : " Text : "Properties of the Selected Route'#13#10'Add Waypoints to the Route" *Trans* : " Text : "Reduce/Expand Route Window" *Trans* : " Text : "Show/Hide Routes on Map" *Trans* : "Pokaż/ukryj trasy na mapie Text : "This will Relink the Route Waypoints with the Waypoints on the Map" *Trans* : " Text : "ReLink" *Trans* : " Text : "Get the Selected Route from the GPS" *Trans* : "Pobierz wybraną trasę z GPS-u Text : "Get" *Trans* : "Pobierz Text : "Expand Route Details" *Trans* : " Text : "Move the Route Up in the List" *Trans* : " Text : "Move the Route Down in the List" *Trans* : " ; Text : "Route Remaining" *Trans* : " Text : " Total Route Remaining " *Trans* : " ; Text : "Select Waypoint" *Trans* : " Text : "Datum : " *Trans* : " Text : "Use Wp" *Trans* : " ; Text : "Select Symbol" *Trans* : "Wybierz symbol ; Text : "Enter Serial Number" *Trans* : "Wprowadź numer seryjny Text : "Serial Number" *Trans* : "Numer seryjny ; Memo : "The Serial Number and corresponding Key Code# must be " Memo : "entered the first time OziExplorer is run after being installed. " Memo : "Once installed correctly they will not be asked for again." Memo : "" Memo : "If they are not entered OziExplorer will run in "Shareware" " Memo : "mode where many features will not be available." Memo : "" Memo : "The Serial Number and Code are located on the CDROM " Memo : "supplied on inside the front cover of the CD case." *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans??: " *Trans??: " ; Text : "Serial Number Information" *Trans* : " Text : "(c) Copyright Des && Lorraine Newman" *Trans* : " ; Text : "Set Active Route" *Trans* : "Ustaw aktywną trasę Text : "Set the Highlighted Route as the Active Route" *Trans* : " Text : "Set" *Trans* : "Ustaw Text : "Reverse Route" *Trans* : "Odwrotna trasa Text : "Load a Set of Routes from File" *Trans* : " Text : "Disable Active Route" *Trans* : " Text : "Disable" *Trans* : " ; Text : "Available toolbar buttons" *Trans* : " Text : "Current toolbar buttons" *Trans* : " Text : "to 2 lines" *Trans* : " Text : "Add ->" *Trans* : " Text : "<- Remove" *Trans* : " Text : "Move Up" *Trans* : " Text : "Move Down" *Trans* : " Text : "Left " *Trans* : " Text : "Flat Buttons" *Trans* : " Text : "Flow Buttons" *Trans* : " ; Text : "Navigate to Waypoint" *Trans* : " ; Text : "Shape File Attributes" *Trans* : " Text : "Name Field" *Trans* : " Text : "Description Field" *Trans* : " ; Text : "Shape File Import" *Trans* : " Text : " Polylines or Polygons to Tracks " *Trans* : " Text : "Shape File (*.shp)|*.shp" *Trans* : " Text : "Import Shape File" *Trans* : " ; Text : " Import Points " *Trans* : " Text : "Only if On Map" *Trans* : " Text : "Replace" *Trans* : " Text : "Append to Existing" *Trans* : " Text : "Action" *Trans* : " Text : "Type" *Trans* : " ; Text : "OziExplorer" *Trans* : " ; Text : "fmTrack3d" *Trans* : " Text : "5.0 August 99 " *Trans* : " Text : "Zoom" *Trans* : " Text : "Pan" *Trans* : " Text : "Lines" *Trans* : " Text : "Dots" *Trans* : " Text : "cSectionNo" *Trans* : " Text : "Section" *Trans* : " Text : " Profile Type " *Trans* : " Text : "Refresh the Track" *Trans* : " ; Text : "Show/Hide Tracks on Map (All Sets)" *Trans* : " Text : "Do not show Track Points" *Trans* : " Text : "Use Mouse to draw a box around Track Points'#13#10'All Points within the box are made Active" *Trans* : " Text : "Show Fixed Track Points" *Trans* : " Text : "Insert Track Point after Selected Active Point'#13#10'Hold down Alt key and press Left Mouse button" *Trans* : " Text : "Reduce/Expand Track Control Window" *Trans* : " Text : "Use Mouse to draw a box around a Track Point'#13#10'All Points in the same Track Section are made Active" *Trans* : " Text : "Show Track Point Hints On or Off" *Trans* : " Text : "All New TrackPoints are created Active" *Trans* : " Text : "More Options ....." *Trans* : " Text : "Move Track Up in the List to Lower Track Number" *Trans* : " Text : "Move Track Down in the List to Higher Track Number" *Trans* : " Text : "Selected Track Properties" *Trans* : " Text : "Split Track 1 into separate Tracks for each Track Section" *Trans* : " Text : "Show Track List" *Trans* : " Text : "Open Properties Dialog when Creating New Track Points" *Trans* : " Text : "Save the Selected Track" *Trans* : " Text : "Track Replay" *Trans* : " Text : "Track Reverse" *Trans* : " Text : "Add Date/Time to Track Points" *Trans* : " Text : "Save Active Track Points to a File" *Trans* : " Text : "Delete Active Track Points" *Trans* : " ; Text : "Track Filter" *Trans* : " Text : "Max Distance" *Trans* : " Text : "From Track" *Trans* : " Text : "To Track" *Trans* : " Text : "Min Distance" *Trans* : " Text : "Max Deviation" *Trans* : " Text : "Max Angle" *Trans* : " Text : "Filter the Track" *Trans* : " Text : "Filter" *Trans* : " Text : "Load Saved Filter" *Trans* : " Text : "Save the Filter Settings to a File" *Trans* : " Text : "Track Filter Setup (*.flt)|*.flt" *Trans* : " Text : "Open Track Filter Setup Files" *Trans* : " Text : "Track Filter setup (*.flt)|*.flt" *Trans* : " Text : "Save Track Filter Setup Files" *Trans* : " ; Text : "Seconds" *Trans* : " Text : "Hours" *Trans* : " Text : "Days" *Trans* : " Text : " X Axis " *Trans* : " ; Text : "Track List" *Trans* : " Text : "Sect" *Trans* : " Text : "Alt(ft)" *Trans* : " Text : "Dist" *Trans* : " Text : "Hdg" *Trans* : " Text : "Find Map for Selected Track Point" *Trans* : " Text : "Plot Location of Selected Track Point on Current Map" *Trans* : " Text : "Show Summary of Selected Track Points" *Trans* : " Text : "Split or Join Track into sections at selected Track Point" *Trans* : " ; Text : "All Track Points" *Trans* : " Text : "Active Points Only" *Trans* : " Text : "Save Track to Disk" *Trans* : " ; Text : "Track Point Properties" *Trans* : " ; Text : "Track Properties" *Trans* : " Text : "x " *Trans* : " Text : "Track Desc" *Trans* : " Text : "Load Track From Disk" *Trans* : " Text : "Clear this Track" *Trans* : " Text : "Line" *Trans* : " Text : "Polygon" *Trans* : " Text : "Alarm Zone" *Trans* : " Text : "Fill Color" *Trans* : " Text : "Solid" *Trans* : " Text : "Diagonal 1" *Trans* : " Text : "Diagonal 2" *Trans* : " Text : "Cross" *Trans* : " Text : "Diag Cross" *Trans* : " Text : "Horizontal" *Trans* : " Text : "Vertical" *Trans* : " Text : "Fill Type" *Trans* : " ; Text : "Replay Speed" *Trans* : " Text : "Slow Down Track Replay Speed" *Trans* : " Text : "Speed Up Track Replay Speed" *Trans* : " Text : "Start / Stop Track Replay" *Trans* : " Text : "Clear Track up to current replay position" *Trans* : " Text : "Replay Track from Start" *Trans* : " Text : "Set Track Replay Color" *Trans* : " Text : "Heading" *Trans* : " Text : "Distance Travelled'#13#10'Double Click to Zero at any Time" *Trans* : " ; Text : "Reverse Track" *Trans* : " Text : "From Track No" *Trans* : " Text : "To Track No" *Trans* : " Text : "Apply" *Trans* : " ; Text : "Set Track Date & Time" *Trans* : " Text : "Time Interval (s)" *Trans* : " Text : " Start Date && Time for Point 1 " *Trans* : " ; Text : "Trial Version" *Trans* : " Text : "This is a Trial Version" *Trans* : " ; Memo : "This is a trial version which has been released to allow users to evaluate and" Memo : "test most of the features which are available for Registered versions of the" Memo : "software." Memo : "" Memo : "The trial version is not intended for regular use and has the following limitations :" Memo : "" Memo : "* Cannot communicate with GPS for upload/download" Memo : "* Cannot Save or Load Waypoints or Events" Memo : "* Will only run for 1 hour continuous" Memo : "* Cannot save map image to Bitmap file" Memo : "" Memo : "NOTE : The trial version cannot be registered. To register OziExplorer you must " Memo : "download the shareware version." *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans??: " *Trans??: " ; Text : "OziMC Trial Version" *Trans* : " Text : "MC" *Trans* : " ; Memo : "This is a trial version which has been released to allow users to " Memo : "evaluate and test OziMC. The trial version allows you to work" Memo : "with OziMC and create road feature data and then upload this" Memo : "data to your GPS using the Lowrance Mapcreate software." Memo : "" Memo : "The trial version has the following limitations :" Memo : "" Memo : "*Displays this screen" Memo : "" Memo : "WorldMaps" Memo : "" Memo : "* Only allows creating and editing of Major Roads" Memo : "* Puts random error of up to 300 metres in Road data" Memo : "" Memo : "SmartMaps" Memo : "" Memo : "* Only allows creating and editing of New (Ozi) Rural Roads" Memo : "* Puts random error of up to 150 metres in Road data" *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans??: " *Trans??: " ; Text : "Form3" *Trans* : " ; Text : "Warning Warning Warning" *Trans* : " Text : "Quiet" *Trans* : " Text : "laser.wav" *Trans* : " ; Text : "To Waypoint" *Trans* : " Text : "Great Circle" *Trans* : " Text : "Rhumb Line" *Trans* : " Text : "Distance :" *Trans* : " Text : "True Bearing :" *Trans* : " Text : "Magnetic Bearing :" *Trans* : " Text : "Label11" *Trans* : " Text : "Label12" *Trans* : " Text : "Label13" *Trans* : " Text : "Close the Distance Window" *Trans* : " ; Text : "Delete the Selected Waypoints" *Trans* : " Text : "Close the Waypoint List" *Trans* : " Text : "Add a New Waypoint" *Trans* : " Text : "Edit the Selected Waypoint" *Trans* : " Text : "Find Map for Selected Waypoint" *Trans* : " Text : "Plot Location of Selected Waypoint on Current Map" *Trans* : " Text : "Change Properties for All Selected Waypoints" *Trans* : " Text : "Send Selected Waypoints to the GPS" *Trans* : " Text : "Save Options" *Trans* : " Text : "Sort Waypoints into Name order" *Trans* : " Text : "Change Symbol" *Trans* : " Text : "Change Display Format" *Trans* : " Text : "Change Garmin Display Format" *Trans* : " Text : "Save Selected Waypoints to a New File" *Trans* : " Text : "Append the Selected Waypoints to an Existing File" *Trans* : " ; Text : "Registered to" *Trans* : "Zarejstrowany na: Text : "Last Trackpoint" *Trans* : " Text : "Waypoint Name or Object not Specified" *Trans* : " Text : "There is no Track available" *Trans* : "Nie jest dostępny żaden szlak Text : "Start Waypoint not specified" *Trans* : "Początkowa pozycja nie jest określona Text : "Distance not specified" *Trans* : "Nieokreślona odległość Text : "Magnetic Variation could not be calculated" *Trans* : "Nie można obliczyć odchylenia magnetycznego Text : "Waypoint Projected successfully as" *Trans* : " Text : "The Track Number is out of Range" *Trans* : "Numer szlaku jest poza zakresem Text : "Send the Track Information to the GPS" *Trans* : "Wyślij informacje o szlaku do GPSa Text : "Send the Track Points to the GPS" *Trans* : "Wyślij punkty szlaku do GPSa Text : "Get the Number of Events (Icons) from the GPS" *Trans* : "Pobierz liczbę przygód z GPSa Text : "The Event Number is out of Range" *Trans* : "Liczba przygód jest poza zakresem Text : "Get Event (Icon) from the GPS" *Trans* : " Text : "The Waypoint Number is out of Range" *Trans* : "Liczba pozycji jest poza zakresem Text : "Get WayPoint from the GPS" *Trans* : " Text : "Load WayPoint into the GPS" *Trans* : " Text : "Load Event (Icon) into GPS" *Trans* : " Text : "The Number of Events is out of Range" *Trans* : " Text : "Set the Number of Events (Icons) into the GPS" *Trans* : " Text : "Initialize GPS" *Trans* : " Text : "Invalid" *Trans* : " Text : "GPS Fix" *Trans* : " Text : "DGPS Fix" *Trans* : " Text : "busy" *Trans* : " Text : "In" *Trans* : " Text : "This comm port is already open" *Trans* : " Text : "Error opening com port" *Trans* : " Text : "Data Error" *Trans* : " Text : "The Route Number is out of Range" *Trans* : " Text : "Get the Route Information from the GPS" *Trans* : " Text : "Send the Route Information to the GPS" *Trans* : " Text : "Get the Track Information from the GPS" *Trans* : " Text : "Get the Track Points from the GPS" *Trans* : " Text : "Viewing" *Trans* : " Text : "This Feature is already being Edited and cannot be Viewed" *Trans* : " Text : "The Polygon for this area of the map was not found" *Trans* : " Text : "This Feature is already being Edited and cannot be Processed" *Trans* : " Text : "A map with a User Grid is not loaded or" *Trans* : " Text : "a User Grid is not configured as the Alternate Grid" *Trans* : " Text : "so the data cannot be Exported in this format" *Trans* : " Text : "Append to Waypoint File" *Trans* : " Text : "The Waypoints Loaded have changes which have not been Saved" *Trans* : " Text : "Continue to Load New Waypoint File" *Trans* : " Text : "Continue to Load New Event File" *Trans* : " Text : "This will append a track to the currently loaded track" *Trans* : " Text : "Continue to Load New Route File" *Trans* : " Text : "no fix" *Trans* : " Text : "Position Cursor on Waypoint, press Left Button" *Trans* : " Text : "Delete this Waypoint from the Route" *Trans* : " Text : "Clear All Waypoints from this Route" *Trans* : " Text : "Send Route Error" *Trans* : " Text : "Get Route Error" *Trans* : " Text : "The selected Route does not exist in the GPS" *Trans* : " Text : "Sorting Points" *Trans* : " Text : "Loading Background Data" *Trans* : " Text : "Background Data Loaded" *Trans* : " Text : "Loading SmartMap Bkg Data" *Trans* : " Text : "SmartMap Bkg Data Loaded" *Trans* : " Text : "Editing" *Trans* : " Text : "Maps Available for this Map Feature" *Trans* : " Text : "Maps Available for this Map Comment" *Trans* : " Text : "Maps Available for this Point" *Trans* : " Text : "Maps Available for this Track Point" *Trans* : " Text : "Maps Available for Entered position" *Trans* : " Text : "This is the Currently Loaded Map" *Trans* : " Text : "Could not Load the Selected Map" *Trans* : " Text : "A Map is Not Selected in the Find Map window" *Trans* : " Text : "No map was found for the selected position" *Trans* : " Text : "Track is not selected in List" *Trans* : " Text : "Delete all Track Points Marked as Active" *Trans* : " Text : "This will Split Track 1 into its sections" *Trans* : " Text : "A new Track will be created for each section" *Trans* : " Text : "Tracks from Number 2 onwards may be overwritten" *Trans* : " Text : "Do you want to Continue" *Trans* : " Text : "Set Date & Time for Track" *Trans* : " Text : "Moving Map is Off" *Trans* : " Text : "Starting next Leg" *Trans* : " Text : "End of Route" *Trans* : " Text : "Entering Alarm Zone" *Trans* : " Text : "Approaching Proximity Waypoint" *Trans* : " Text : "Moving Map - Invalid Data" *Trans* : " Text : "Could not Initialize Communications" *Trans* : " Text : "Could not open Comm port for AutoPilot Communication" *Trans* : " Text : "Blank Map" *Trans* : " Text : "Maps Available to" *Trans* : " Text : "Maps Available for this Position" *Trans* : " Text : "Maps Available for MM Position" *Trans* : " Text : "Maps Available for Cursor Position" *Trans* : " Text : "Maps Available for this Waypoint" *Trans* : " Text : "Maps Available for this Event" *Trans* : " Text : "Select all Track Points which do not plot within the boundaries of the current Map" *Trans* : " Text : "Time taken" *Trans* : " Text : "No Time" *Trans* : " Text : "Minimum Speed" *Trans* : " Text : "Maximum Speed" *Trans* : " Text : "Average Speed" *Trans* : " Text : "Minimum Altitude" *Trans* : " Text : "Maximum Altitude" *Trans* : " Text : "Distance Km" *Trans* : " Text : "Distance m" *Trans* : " Text : "Distance nm" *Trans* : " Text : "Seg" *Trans* : " Text : "Moving map is On" *Trans* : " Text : "The DRG Map has been Imported successfully and an OziExplorer Map created." *Trans* : " Text : "The Image file has not been moved and must always be available when the Map file is Opened" *Trans* : " Text : "Step 3 : The New Map will now be opened" *Trans* : " Text : "Step 1 : Find the Image file of the map you want to import" *Trans* : " Text : "UTM Zone not specified" *Trans* : " Text : "Cannot find georeference data" *Trans* : " Text : "The Currently Opened Map must be Closed" *Trans* : " Text : "Maps were Imported successfully" *Trans* : " Text : "Maps were NOT Imported successfully" *Trans* : " Text : "Import Track from Text File" *Trans* : " Text : "There is no Track Point Selected" *Trans* : " Text : "There are no Track Points Selected" *Trans* : " Text : "Track Point is not located on this Map" *Trans* : " Text : "Save the Selected TrackPoints to File" *Trans* : " Text : "The Demo version can only do 2 point Map calibrations." *Trans* : " Text : "The Map will be loaded using the 2 point method but will be" *Trans* : " Text : "inaccurate and unstable and should not be used." *Trans* : " Text : "6 Characters for Easting 7 Characters for Northing" *Trans* : " Text : "5 Characters for Easting and Northing" *Trans* : " Text : "7 Characters for Easting and Northing" *Trans* : " Text : "Do you want to proceed ?" *Trans* : " Text : "1 or more of the specified Eastings or Northings may not have the correct number of Digits" *Trans* : " Text : "1 or more of the Calibration Points has both a Lat/Lon and Grid entered" *Trans* : " Text : "By Default the Lat/Lon will be used for Calibration" *Trans* : " Text : "Error #3 calculating Map Calibration, probable Map calibration error." *Trans* : " Text : "Note - Specifying a polynomial calibration for a linear map can cause the calibration to be unpredictable." *Trans* : " Text : "Use with Caution" *Trans* : " Text : "Step 2 : Specify the Name and Path of the OziExplorer Map file you want to create" *Trans* : " Text : "USGS DRG File Import" *Trans* : " Text : "Cannot Load Image File, a Blank image will be loaded instead" *Trans* : " Text : "Press OK and then select Cancel on the Calibration" *Trans* : " Text : "Window to abort" *Trans* : " Text : "There must be at least 2 valid Calibration Points" *Trans* : " Text : "Latitude 1 must be entered" *Trans* : " Text : "Latitude 2 must be entered" *Trans* : " Text : "Latitude 2 cannot be the same value as Latitude 1" *Trans* : " Text : "Central Meridian must be entered" *Trans* : " Text : "Latitude Origin must be entered" *Trans* : " Text : "Kfactor must be entered" *Trans* : " Text : "Kfactor cannot be zero" *Trans* : " Text : "False Easting must be entered" *Trans* : " Text : "False Northing must be entered" *Trans* : " Text : "Setup Error for" *Trans* : " Text : "This Map has been Calibrated using more than 2 calibration points." *Trans* : " Text : "Point is not located on this Map" *Trans* : " Text : "Save the Selected Points to File" *Trans* : " Text : "Select all Points which do not plot within the boundaries of the current Map" *Trans* : " Text : "Point Set is not selected in List" *Trans* : " Text : "Delete all Points Marked as Active" *Trans* : " Text : "BNG Coordinates" *Trans* : " Text : "NZG Coordinates" *Trans* : " Text : "Swedish Coordinates" *Trans* : " Text : "Swiss Coordinates" *Trans* : " Text : "Irish Coordinates" *Trans* : " Text : "French Coordinates" *Trans* : " Text : "Montana SP Zone 2500" *Trans* : " Text : "The Demo version can only load BMP images" *Trans* : " Text : "Calibration" *Trans* : " Text : "PVT data transfer (Type D800) is not supported in this Model" *Trans* : " Text : "invalid data" *Trans* : " Text : "Get the Number of Satellites from the GPS" *Trans* : " Text : "Get Satellite from the GPS" *Trans* : " Text : "checksum error" *Trans* : " Text : "Data record exceeds Max Record Length - Is your Garmin GPS Interface set to GRMN/GRMN (Garmin) Mode" *Trans* : " Text : "Track not loaded" *Trans* : " Text : "Points not loaded" *Trans* : " Text : "There is no Point Selected" *Trans* : " Text : "There are no Points Selected" *Trans* : " Text : "Delete the Selected Points" *Trans* : " Text : "GPS not supported for Route upload" *Trans* : " Text : "Send the Number of Route Records to the GPS" *Trans* : " Text : "Load Route Record into the GPS" *Trans* : " Text : "GPS not supported for Route Link upload" *Trans* : " Text : "Send Route Link to the GPS" *Trans* : " Text : "Send End of Route records to the GPS" *Trans* : " Text : "GPS not supported for Track download" *Trans* : " Text : "Get the Number of TrackPoints from the GPS" *Trans* : " Text : "Get TrackPoint from the GPS" *Trans* : " Text : "GPS not supported for Track upload" *Trans* : " Text : "Send the Number of Track points to the GPS" *Trans* : " Text : "Send Track header to the GPS" *Trans* : " Text : "Send Trackpoint to the GPS" *Trans* : " Text : "Send End of Track point records to the GPS" *Trans* : " Text : "Wait for last record command" *Trans* : " Text : "Get Route from the GPS" *Trans* : " Text : "Send Waypoint to the GPS" *Trans* : " Text : "Send Route Record to the GPS" *Trans* : " Text : "Send TrackPoint to the GPS" *Trans* : " Text : "This Model of GPS is not supported" *Trans* : " Text : "GPS is not supported for Waypoint download" *Trans* : " Text : "Get the Number of Waypoints from the GPS" *Trans* : " Text : "GPS is not supported for Waypoint upload" *Trans* : " Text : "Send the Number of Waypoints to the GPS" *Trans* : " Text : "Send End of Waypoint records to the GPS" *Trans* : " Text : "GPS not supported for Route download" *Trans* : " Text : "Get the Number of Routes from the GPS" *Trans* : " Text : "Current Settings Saved as the Default" *Trans* : " Text : "The Demo version can only do 2 point Map calibrations" *Trans* : " Text : "This chart has more than 9 calibration points and therefore the calibration cannot be changed manually." *Trans* : " Text : "This Chart is set to use the manufacturers calibration" *Trans* : " Text : "Changing the calibration points here will have no affect." *Trans* : " Text : "This setting can be changed on the Calibration Options window." *Trans* : " Text : "This Chart has more than 4 corner markers so it is not possible to set them manually" *Trans* : " Text : "RIK maps cannot be calibrated manually" *Trans* : " Text : "GPS Transfer Aborted due to GPS being unable to process the command" *Trans* : " Text : "The GPS is unable to process the uploaded Route" *Trans* : " Text : "The GPS is unable to process the uploaded Waypoint" *Trans* : " Text : "GPS Message Error" *Trans* : " Text : "Get Version from the GPS" *Trans* : " Text : "Get Track from the GPS" *Trans* : " Text : "BSB File Directory has not been selected" *Trans* : " Text : "There was no valid track found on the Clipboard" *Trans* : " Text : "This Track has more than 1384 track points, due to problems with GDM only the first 1384 will be transferred." *Trans* : " Text : "This will Delete All the Waypoints from your GPS - Are you sure" *Trans* : " Text : "This will Delete All the Routes from your GPS - Are you sure" *Trans* : " Text : "This will Delete the Track from your GPS - Are you sure" *Trans* : " Text : "This will Delete All the Saved Fixes from your GPS - Are you sure" *Trans* : " Text : "This will Send Track 1 to the GPS" *Trans* : " Text : "Note : Only selected Magellan models support upload of Tracks" *Trans* : " Text : "Shape File Import/Export Options" *Trans* : " Text : "Position Format" *Trans* : " Text : "UTM Zone" *Trans* : " Text : "There is no Target Selected" *Trans* : " Text : "Target not found" *Trans* : " Text : "Delete the Selected Targets" *Trans* : " Text : "No Shift ....." *Trans* : " Text : "BSB File Import" *Trans* : " Text : "The BSB Chart has been Imported successfully and an OziExplorer Map created." *Trans* : " Text : "The BSB file has not been moved and must always be available when the Map file is opened" *Trans* : " Text : "Step 1 : Find the KAP or NOS file of the BSB or NOS/GEO Chart you want to import" *Trans* : " Text : "Cannot Read the BSB file" *Trans* : " Text : "Cannot Find the GEO file" *Trans* : " Text : "Cannot Read the NOS or GEO file" *Trans* : " Text : "This Chart has a Datum which OziExplorer does not support. The Datum has been set to WGS 84" *Trans* : " Text : "Charts were Imported successfully" *Trans* : " Text : "Charts were NOT Imported successfully" *Trans* : " Text : "Charts have Datums which OziExplorer does not support" *Trans* : " Text : "This is not a Navigation Chart and cannot be imported" *Trans* : " Text : "is Not a Point File" *Trans* : " Text : "Choose" *Trans* : " Text : "A Symbol has not been selected" *Trans* : " Text : "New Name has been added" *Trans* : " Text : "Enter Group" *Trans* : " Text : "Enter Owner" *Trans* : " Text : "New Group has been added" *Trans* : " Text : "New Owner has been added" *Trans* : " Text : "This will Send the Waypoints to the GPS" *Trans* : " Text : "This will clear ALL the Waypoints from the Map" *Trans* : " Text : "Night Vision and Intensity only functions with 2, 16 or 256 color map images" *Trans* : " Text : "OziExplorer must be Closed and Restarted to activate the Registration" *Trans* : " Text : "Something is wrong with the Key - Key file not Saved" *Trans* : " Text : "Track Points Loaded" *Trans* : " Text : "All Selected Objects will be Deleted" *Trans* : " Text : "Map File Saved with new Calibration" *Trans* : " Text : "There is no Map Comment Selected" *Trans* : " Text : "Delete the Selected Map Comments" *Trans* : " Text : "Select all Map Comments which do not plot within the boundaries of the current Map" *Trans* : " Text : "Map Comment is not located on this Map" *Trans* : " Text : "There is no Map Feature Selected" *Trans* : " Text : "Select all Map Features which do not plot within the boundaries of the current Map" *Trans* : " Text : "Map Feature is not located on this Map" *Trans* : " Text : "This is a \"Fixed\" Map Feature and cannot be deleted" *Trans* : " Text : "The DLL to load Maptech files (ozipcx.dll) was not found or could not be loaded" *Trans* : " Text : "Blank" *Trans* : " Text : "Error #112 Saving Image file" *Trans* : " Text : "Error #110 Creating Image File" *Trans* : " Text : "Error #111 Creating Image File - insufficient disk space" *Trans* : " Text : "Creating Image File" *Trans* : " Text : "Saving Strip" *Trans* : " Text : "Error #113 Saving Map - cannot create temporary bitmap" *Trans* : " Text : "Error #114 Saving Map - error in copy" *Trans* : " Text : "Saving Finished" *Trans* : " Text : "Strips" *Trans* : " Text : "Loaded Map is not Valid" *Trans* : " Text : "Name and Key Code has been accepted" *Trans* : " Text : "RIK map engine not found" *Trans* : " Text : "0009" *Trans* : " Text : "BDE error $%.4x" *Trans* : " Text : "Not in cached update mode" *Trans* : " Text : "Cannot access field '%s' in a filter" *Trans* : " Text : "Untitled Application" *Trans* : " Text : "No provider available" *Trans* : " Text : "Position is not entered correctly" *Trans* : " Text : "There is no map loaded" *Trans* : " Text : "Searching" *Trans* : " Text : "This map file is missing information, it may have been recently imported using just a TFW file. Save the map after it is loaded to save the information required." *Trans* : " Text : "Could not load attached file" *Trans* : " Text : "Cannot Find the Map File" *Trans* : " Text : "Only the Registered version can Load image files in TIF format" *Trans* : " Text : "The From Track and the To Track cannot be the same number" *Trans* : " Text : "Mouse Point" *Trans* : " Text : "Duplicate database name '%s'" *Trans* : " Text : "Duplicate session name '%s'" *Trans* : " Text : "Invalid session name %s" *Trans* : " Text : "Database name missing" *Trans* : " Text : "Session name missing" *Trans* : " Text : "Cannot perform this operation on an open database" *Trans* : " Text : "Database handle owned by a different session" *Trans* : " Text : "Cannot perform this operation on an active session" *Trans* : " Text : "Error creating cursor handle" *Trans* : " Text : "Cannot connect to database '%s'" *Trans* : " Text : "An error occurred while attempting to initialize the Borland Database Engine (error $%.4x)" *Trans* : " Text : "The Scale is Invalid" *Trans* : " Text : "The Scale is too Small - the Minimum allowed is 1:500" *Trans* : " Text : "Map area has not been Selected" *Trans* : " Text : "MapCreate Editing" *Trans* : " Text : "The Feature changes have not been Saved" *Trans* : " Text : "Press Yes to save" *Trans* : " Text : "Press No to continue without Saving" *Trans* : " Text : "Press Cancel to return" *Trans* : " Text : "Track Number 1" *Trans* : " Text : "Loaded Route File" *Trans* : " Text : "Loaded Event File" *Trans* : " Text : "Simulator" *Trans* : " Text : "TIF File Directory has not been selected" *Trans* : " Text : "No Routes are loaded" *Trans* : " Text : "Route Not Selected" *Trans* : " Text : "Route List" *Trans* : " Text : "Route File" *Trans* : " Text : "Route List continued" *Trans* : " Text : "Routes Printed" *Trans* : " Text : "Pages" *Trans* : " Text : "Map File Name" *Trans* : " Text : "Map Image Name" *Trans* : " Text : "Map Mag Variation" *Trans* : " Text : "Calculated by Software" *Trans* : " Text : "GPS Up/Down Datum" *Trans* : " Text : "GPS NMEA Datum" *Trans* : " Text : "Loaded Waypoint File" *Trans* : " Text : "Select all Events which do not plot within the boundaries of the current Map" *Trans* : " Text : "Event is not located on this Map" *Trans* : " Text : "Error #101 Printing Map" *Trans* : " Text : "Cannot Print this map to scale" *Trans* : " Text : "Printing Map" *Trans* : " Text : "It is not possible to print this Map with the Scale Specified" *Trans* : " Text : "With the Scale Specified this Map will produce" *Trans* : " Text : "pages of print and will be Aborted" *Trans* : " Text : "pages of print" *Trans* : " Text : "Continue ?" *Trans* : " Text : "Printing Page" *Trans* : " Text : "Press Esc to Abort" *Trans* : " Text : "Error #101 Printing Map - cannot create temporary bitmap" *Trans* : " Text : "Error #103 Printing Map - error in copy" *Trans* : " Text : "Error #102 Printing Map" *Trans* : " Text : "Printing Finished" *Trans* : " Text : "Registration Failed" *Trans* : " Text : "Please configure the GPS Data Output to WPTS+ROUTES" *Trans* : " Text : "Please configure the GPS Data Output to TRACK" *Trans* : " Text : "There is no Waypoint Selected" *Trans* : " Text : "There are no Waypoints Selected" *Trans* : " Text : "Select all Waypoints which do not plot within the boundaries of the current Map" *Trans* : " Text : "Waypoint is not located on this Map" *Trans* : " Text : "Send the Selected Waypoints to the GPS" *Trans* : " Text : "Save the Selected Waypoints to File" *Trans* : " Text : "Append the Selected Waypoints to File" *Trans* : " Text : "There is no Event Selected" *Trans* : " Text : "The Number of Routes specified for the GPS exceeded the capacity of the Software and has been reduced." *Trans* : " Text : "The Number of Waypoints per Route specified for the GPS exceeded the capacity of the Software and has been reduced." *Trans* : " Text : "If the Blank Map is open it must be closed and opened again for the new Datum to be activated" *Trans* : " Text : "The NMEA output for AutoPilots is new and untested." *Trans* : " Text : "DO NOT RELY on it for unsupervised NAVIGATION." *Trans* : " Text : "The sentences output are RMC,RMB,APB and BWC" *Trans* : " Text : "You have selected a Baud Rate greater than 9600." *Trans* : " Text : "Magellans do not like to use Baud Rates greater than 9600 even though they can be selected in the GPS, this applies to the latest models also." *Trans* : " Text : "The Baud Rate can still be changed if required." *Trans* : " Text : "You have selected to change the Baud Rate from 9600 but you have a Garmin GPS selected. Garmins always do upload/download at 9600 baud." *Trans* : " Text : "You have selected to change the Baud Rate from 4800 but you have a MLR GPS selected. MLRs may require a Baud Rate of 4800 baud." *Trans* : " Text : "This is just a warning the Baud Rate can still be changed if new models require it." *Trans* : " Text : "The Serial Port Driver cannot be changed while it is Active" *Trans* : " Text : "Picture not found" *Trans* : " Text : "Registration OK" *Trans* : " Text : "Arrived" *Trans* : " Text : "Lat/Long Coordinates" *Trans* : " Text : "France I" *Trans* : " Text : "France II" *Trans* : " Text : "France III" *Trans* : " Text : "France IV" *Trans* : " Text : "The Number of Waypoints specified for the GPS exceeded the capacity of the Software and has been reduced." *Trans* : " Text : "The Number of Events specified for the GPS exceeded the capacity of the Software and has been reduced." *Trans* : " Text : "The Number of Track Points specified for the GPS exceeded the capacity of the Software and has been reduced." *Trans* : " Text : "A New Name was not specified" *Trans* : " Text : "Cannot Delete the Standard symbol sets" *Trans* : " Text : "Event List continued" *Trans* : " Text : "Events Printed" *Trans* : " Text : "Waypoint File" *Trans* : " Text : "Waypoint List continued" *Trans* : " Text : "Map Feature Waypoints" *Trans* : " Text : "Map Feature Waypoint" *Trans* : " Text : "Waypoints Printed" *Trans* : " Text : "Route Number" *Trans* : " Text : "Route Description" *Trans* : " Text : "There is No Waypoint Selected" *Trans* : " Text : "There is No Active Route Set" *Trans* : " Text : "The Track is Empty" *Trans* : " Text : "Display Position in the" *Trans* : " Text : "Grid" *Trans* : " Text : "You may need to configure the GPS Data Output to WPTS+ROUTES or TRACK" *Trans* : " Text : "No Waypoints Loaded" *Trans* : " Text : "No Waypoint Selected" *Trans* : " Text : "maps were imported successfully" *Trans* : " Text : "OLE error %.8x" *Trans* : " Text : "Method '%s' not supported by automation object" *Trans* : " Text : "Variant does not reference an automation object" *Trans* : " Text : "Operation not allowed on an empty OLE container" *Trans* : " Text : "Invalid object verb" *Trans* : " Text : "Invalid stream format" *Trans* : " Text : "Find Maps at Position" *Trans* : " Text : "All the Position Fields are not entered correctly" *Trans* : " Text : "Waypoint Error" *Trans* : " Text : "Deleting Waypoint" *Trans* : " Text : "Waypoints Deleted" *Trans* : " Text : "Delete Reserved Waypoints from the GPS" *Trans* : " Text : "Get Event Number Error" *Trans* : " Text : "Get Event Error" *Trans* : " Text : "Send Event Error" *Trans* : " Text : "Events Sent" *Trans* : " Text : "This will Send the Events to the GPS" *Trans* : " Text : "This will clear the Track Points from Track 1" *Trans* : " Text : "Get Track Info Error" *Trans* : " Text : "Get Track Points Error" *Trans* : " Text : "Send Track Info Error" *Trans* : " Text : "Track Sent" *Trans* : " Text : "Send Track Points Error" *Trans* : " Text : "Send Track Header Error" *Trans* : " Text : "Send Track Point Error" *Trans* : " Text : "Track Points Sent" *Trans* : " Text : "Get Route Record Error" *Trans* : " Text : "Route Waypoint" *Trans* : " Text : "Send Route Record Error" *Trans* : " Text : "Send Route Waypoint Error" *Trans* : " Text : "Send Route Link Error" *Trans* : " Text : "Route Sent" *Trans* : " Text : "Waypoint Sent" *Trans* : " Text : "Route received" *Trans* : " Text : "Routes Received" *Trans* : " Text : "Delete UnReserved Waypoints from the GPS" *Trans* : " Text : "Are you Sure - Have you saved your Waypoints to a file. This operation is not reversible" *Trans* : " Text : "Clear ALL the Waypoints from the Map" *Trans* : " Text : "Send the Track points to the GPS" *Trans* : " Text : "There is no Track loaded" *Trans* : " Text : "This will Send the Routes to the GPS" *Trans* : " Text : "Get the Almanac from the GPS and save it to a Text File" *Trans* : " Text : "Get Satellite Error" *Trans* : " Text : "Almanac Received" *Trans* : " Text : "Send Waypoint Error" *Trans* : " Text : "Get Waypoint Error" *Trans* : " Text : "Waypoints Received" *Trans* : " Text : "Get Track Point Error" *Trans* : " Text : "Track Record" *Trans* : " Text : "Track Received" *Trans* : " Text : "GPS Communication Failure" *Trans* : " Text : "GPS Transfer Aborted at User Request" *Trans* : " Text : "GPS User Abort" *Trans* : " Text : "Failure to" *Trans* : " Text : "The Data returned from the GPS fails the Checksum" *Trans* : " Text : "Communicate with the GPS" *Trans* : " Text : "Waypoints Sent" *Trans* : " Text : "Send the Waypoint to the GPS" *Trans* : " Text : "Send the Waypoints to the GPS" *Trans* : " Text : "The number of points in this track exceeds the limit of 20000." *Trans* : " Text : "Red 2" *Trans* : " Text : "Red 3" *Trans* : " Text : "Red 4" *Trans* : " Text : "Gray 1" *Trans* : " Text : "Gray 2" *Trans* : " Text : "Gray 3" *Trans* : " Text : "Gray 4" *Trans* : " Text : "Gray 5" *Trans* : " Text : "Gray 6" *Trans* : " Text : "Gray 7" *Trans* : " Text : "Gray 8" *Trans* : " Text : "Gray 9" *Trans* : " Text : "Gray 10" *Trans* : " Text : "Gray 11" *Trans* : " Text : "Transparent" *Trans* : " Text : "Teal" *Trans* : " Text : "Lime" *Trans* : " Text : "Silver" *Trans* : " Text : "Navy" *Trans* : " Text : "Olive" *Trans* : " Text : "Purple" *Trans* : " Text : "Fuchsia" *Trans* : " Text : "Maroon" *Trans* : " Text : "Orange" *Trans* : " Text : "Pink" *Trans* : " Text : "Bronze" *Trans* : " Text : "Steel" *Trans* : " Text : "Blue 1" *Trans* : " Text : "Blue 2" *Trans* : " Text : "Blue 3" *Trans* : " Text : "Blue 4" *Trans* : " Text : "Red 1" *Trans* : " Text : "Due to licensing restrictions this type of map cannot be printed" *Trans* : " Text : "There are no more free Waypoints to Allocate" *Trans* : " Text : "Clear the Track Log File." *Trans* : " Text : "This file is created automatically when using Moving Map and logging Track points." *Trans* : " Text : "Do you want to Clear the Recent Map List" *Trans* : " Text : "This will save the maps current position as the default opening position" *Trans* : " Text : "Clear the Points from the Map" *Trans* : " Text : "There are no more free Map Features to Allocate" *Trans* : " Text : "Red" *Trans* : " Text : "Blue" *Trans* : " Text : "Green" *Trans* : " Text : "Black" *Trans* : " Text : "Gray" *Trans* : " Text : "White" *Trans* : " Text : "Yellow" *Trans* : " Text : "Aqua" *Trans* : " Text : "Clear ALL the Waypoints, Events, Routes , Track and Points from the Map" *Trans* : " Text : "Zoom Window cannot be displayed without an Image Loaded" *Trans* : " Text : "Error #1 Creating BitMap" *Trans* : " Text : "Clear ALL the Routes from the Map" *Trans* : " Text : "Send the Routes to the GPS" *Trans* : " Text : "Routes Sent" *Trans* : " Text : "Clear ALL the Route Data from the Map" *Trans* : " Text : "Do you really want to Quit" *Trans* : " Text : "The Events Loaded have changes which have not been Saved" *Trans* : " Text : "The Track Loaded into Track" *Trans* : " Text : "has changes which have not been Saved" *Trans* : " Text : "The Points Loaded have changes which have not been Saved" *Trans* : " Text : "The MapCreate Feature being Edited has changes which have not been Saved" *Trans* : " Text : "The Routes Loaded have changes which have not been Saved" *Trans* : " Text : "View - Show Track Profile" *Trans* : " Text : "Mov Map - Show/Hide Range Rings" *Trans* : " Text : "Options - Show/Hide Name Search" *Trans* : " Text : "Map - Show/Hide Index Map" *Trans* : " Text : "There are no more free Map Comments to Allocate" *Trans* : " Text : "There is no more free memory to Allocate for TrackPoints" *Trans* : " Text : "There is no more free memory to Allocate for Points" *Trans* : " Text : "There are no more free Events to Allocate" *Trans* : " Text : "This Route is Full" *Trans* : " Text : "There are no more free TrackPoints to Allocate" *Trans* : " Text : "Load Attached Map" *Trans* : " Text : "Clear ALL the Events from the Map" *Trans* : " Text : "Clear the Track Points from the Map" *Trans* : " Text : "Options - Project New Waypoint" *Trans* : " Text : "Mov Map - Range Rings Setup" *Trans* : " Text : "GPS - Get Waypoints from GPS" *Trans* : " Text : "GPS - Get Routes from GPS" *Trans* : " Text : "GPS - Get Track from GPS" *Trans* : " Text : "GPS - Get Events from GPS" *Trans* : " Text : "GPS - Send Waypoints to GPS" *Trans* : " Text : "GPS - Send Routes to GPS" *Trans* : " Text : "GPS - Send Track to GPS" *Trans* : " Text : "GPS - Send Events to GPS" *Trans* : " Text : "Other - Zoom 100%" *Trans* : " Text : "Other - Zoom Full Map" *Trans* : " Text : "Other - Zoom 50%" *Trans* : " Text : "Other - Zoom 200%" *Trans* : " Text : "Other - Zoom 75%" *Trans* : " Text : "View - Show Track Filter Control" *Trans* : " Text : "Nav - Cancel Navigation" *Trans* : " Text : "Mov Map - On/Off Automatically Scroll Map" *Trans* : " Text : "Other - Check for more Detailed Map" *Trans* : " Text : "Other - Find Map at MM Position" *Trans* : " Text : "Other - Save All Files" *Trans* : " Text : "File - Customize Toolbar" *Trans* : " Text : "File - Print Waypoint List" *Trans* : " Text : "File - Print Event List" *Trans* : " Text : "File - Print Route List" *Trans* : " Text : "File - Print Map Image" *Trans* : " Text : "Select - Copy Map Screen to Clipboard" *Trans* : " Text : "Select - Show Selection Control" *Trans* : " Text : "Other - Show/Hide lat-Lon Grid" *Trans* : " Text : "Other - Show/Hide Other Grid" *Trans* : " Text : "Map - Show/Hide Waypoints" *Trans* : " Text : "Map - Show/Hide Events" *Trans* : " Text : "View - Distance Between Waypoints" *Trans* : " Text : "Map - Grid Line Setup" *Trans* : " Text : "View - Route Editor" *Trans* : " Text : "View - Hide All Map Objects" *Trans* : " Text : "View - UnHide All Map Objects" *Trans* : " Text : "Other - Find maps at Current Position" *Trans* : " Text : "Options - Night Vision" *Trans* : " Text : "Options - Area Calculation" *Trans* : " Text : "Mov Map - Show GPS Fix Data" *Trans* : " Text : "Mov Map - NMEA Simulator" *Trans* : " Text : "Mov Map - Attach Cursor Line to Position" *Trans* : " Text : "Mov Map - Show Regional Map Window" *Trans* : " Text : "Mov Map - View Waypoint Proximity Zones" *Trans* : " Text : "Nav - Navigate along a Route" *Trans* : " Text : "Nav - Navigate to a Waypoint" *Trans* : " Text : "File - Assign Function Keys" *Trans* : " Text : "Nav - Show/Hide Navigation Control" *Trans* : " Text : "View - Show/Hide Routes" *Trans* : " Text : "View - Show/Hide Track" *Trans* : " Text : "View - Show/Hide Track Control" *Trans* : " Text : "View - Show/Hide Track Replay Control" *Trans* : " Text : "View - Show Track Move Control" *Trans* : " Text : "Mov Map - Start/Stop NMEA Communication" *Trans* : " Text : "View - Show/Hide Point Control" *Trans* : " Text : "View - Show/Hide Points" *Trans* : " Text : "Mov Map - Waypoint Marker" *Trans* : " Text : "Mov Map - Waypoint - Man Overboard" *Trans* : " Text : "File - Configuration" *Trans* : " Text : "View - Datum List" *Trans* : " Text : "View - Waypoint List" *Trans* : " Text : "View - Event List" *Trans* : " Text : "View - Distance Display" *Trans* : " Text : "Distance & Bearing from Event" *Trans* : " Text : "Distance & Bearing from Wpt" *Trans* : " Text : "The Map File has changes which have not been Saved" *Trans* : " Text : "Save the Map File?" *Trans* : " Text : "Save the Track File?" *Trans* : " Text : "Save the Point File?" *Trans* : " Text : "Save the Waypoint File?" *Trans* : " Text : "Save the Event File?" *Trans* : " Text : "Save the Route File?" *Trans* : " Text : "Zoom is not available for this map" *Trans* : " Text : "Unassigned" *Trans* : " Text : "Separator" *Trans* : " Text : "Mov Map - Show/Hide Moving Map Control" *Trans* : " Text : "There are no more free Waypoints to Allocate to Map Features" *Trans* : " Text : "Error #2 calculating Waypoint position, possible Map calibration error." *Trans* : " Text : "Loading Image" *Trans* : " Text : "Error Loading Image" *Trans* : " Text : "No File Loaded" *Trans* : " Text : "A Map must be Loaded to do this Operation" *Trans* : " Text : "is available in the Registered version" *Trans* : " Text : "Distance & Bearing from Position" *Trans* : " Text : "Distance & Bearing from Mark" *Trans* : " Text : "Distance & Bearing from Point" *Trans* : " Text : "Distance & Bearing from Mf" *Trans* : " Text : "Distance & Bearing from Track Point" *Trans* : " Text : "of" *Trans* : " Text : "Events Used" *Trans* : " Text : "Waypoints Used" *Trans* : " Text : "No Date" *Trans* : " Text : "Scanning Maps" *Trans* : " Text : "Sent" *Trans* : " Text : "Received" *Trans* : " Text : "Depth" *Trans* : " Text : "Sec" *Trans* : " Text : "All Makes" *Trans* : " Text : "North & West (NW)" *Trans* : " Text : "From" *Trans* : " Text : "East" *Trans* : " Text : "West" *Trans* : " Text : "North" *Trans* : " Text : "South" *Trans* : " Text : "Km" *Trans* : " Text : "nm" *Trans* : " Text : "Bearing" *Trans* : " Text : "Track Imported" *Trans* : " Text : "ft" *Trans* : " Text : "Dist(m)" *Trans* : " Text : "Dist(ft)" *Trans* : " Text : "Alt(m)" *Trans* : " Text : "Yes" *Trans* : " Text : "No" *Trans* : " Text : "Deleted" *Trans* : " Text : "The current Map File has changes which have not been Saved" *Trans* : " Text : "Are you sure you want to Discard the Changes?" *Trans* : " Text : "Datum of Loaded Map" *Trans* : " Text : "All" *Trans* : " Text : "No Altitude" *Trans* : " Text : "Waypoints Imported" *Trans* : " Text : "Events Received" *Trans* : " Text : "Cannot Find the Image File for Map" *Trans* : " Text : "The Image File Recorded for this Map is" *Trans* : " Text : "Browse Disk for new location of Image File" *Trans* : " Text : "Point" *Trans* : " Text : "Compiling" *Trans* : " Text : "Done" *Trans* : " Text : "Processed" *Trans* : " Text : "Waypoints Saved" *Trans* : " Text : "Waypoints Loaded" *Trans* : " Text : "Track Points Saved" *Trans* : " Text : "Waypoints Appended" *Trans* : " Text : "Events Saved" *Trans* : " Text : "Events Loaded" *Trans* : " Text : "Events Appended" *Trans* : " Text : "Routes Loaded" *Trans* : " Text : "Points Loaded" *Trans* : " Text : "Points Saved" *Trans* : " Text : "28 Symbols" *Trans* : " Text : "15 Symbols" *Trans* : " Text : "10 Symbols" *Trans* : " Text : "20 Symbols" *Trans* : " Text : "Garmin Symbols" *Trans* : " Text : "Map File" *Trans* : " Text : "Event File" *Trans* : " Text : "Printed" *Trans* : " Text : "Minutes.m" *Trans* : " Text : "Min Secs.s" *Trans* : " Text : "There is no Legend for this map" *Trans* : " Text : "Not available when using PVT mode" *Trans* : " Text : "This file has an attribute of Read Only and cannot be saved." *Trans* : " Text : "Press Yes to change the attribute and save the file." *Trans* : " Text : "If the file is on a CDROM it cannot be saved." *Trans* : " Text : "This OZF image was created from a licensed chart" *Trans* : " Text : "Due to licensing restrictions this type of chart cannot be saved" *Trans* : " Text : "Due to licensing restrictions this type of map cannot be saved" *Trans* : " Text : "Version" *Trans* : " Text : "Unable to write to %s" *Trans* : " Text : "Bits index out of range" *Trans* : " Text : "Invalid data type for '%s'" *Trans* : " Text : "Failed to create key %s" *Trans* : " Text : "Failed to set data for '%s'" *Trans* : " Text : "Failed to get data for '%s'" *Trans* : " Text : "Menu '%s' is already being used by another form" *Trans* : " Text : "No MCI device open" *Trans* : " Text : "Unknown error code" *Trans* : " Text : "Alt+" *Trans* : " Text : "Invalid file name - %s" *Trans* : " Text : "Unable to insert a line" *Trans* : " Text : "The specified directory does not exist. Create it?" *Trans* : " Text : "Select Directory" *Trans* : " Text : "Unable to create directory" *Trans* : " Text : "Directory &Name:" *Trans* : " Text : "D&rives:" *Trans* : " Text : "&Directories:" *Trans* : " Text : "&Files: (*.*)" *Trans* : " Text : "Ne&twork..." *Trans* : " Text : "Invalid clipboard format" *Trans* : " Text : "Clipboard does not support Icons" *Trans* : " Text : "Text exceeds memo capacity" *Trans* : " Text : "Operation not supported on selected printer" *Trans* : " Text : "There is no default printer currently selected" *Trans* : " Text : "Tab" *Trans* : " Text : "Esc" *Trans* : " Text : "Enter" *Trans* : " Text : "Space" *Trans* : " Text : "PgUp" *Trans* : " Text : "PgDn" *Trans* : " Text : "End" *Trans* : " Text : "Home" *Trans* : " Text : "Up" *Trans* : " Text : "Down" *Trans* : " Text : "Ins" *Trans* : " Text : "Del" *Trans* : " Text : "Shift+" *Trans* : " Text : "Ctrl+" *Trans* : " Text : "Warning" *Trans* : " Text : "Error" *Trans* : " Text : "Confirm" *Trans* : " Text : "&Yes" *Trans* : " Text : "&No" *Trans* : " Text : "&Abort" *Trans* : " Text : "&Retry" *Trans* : " Text : "&Ignore" *Trans* : " Text : "&All" *Trans* : " Text : "N&o to All" *Trans* : " Text : "Y&es to All" *Trans* : " Text : "BkSp" *Trans* : " Text : "Cannot drag a form" *Trans* : " Text : "PutObject to undefined item" *Trans* : " Text : "Metafiles" *Trans* : " Text : "Enhanced Metafiles" *Trans* : " Text : "Bitmaps" *Trans* : " Text : "Grid too large for operation" *Trans* : " Text : "Too many rows or columns deleted" *Trans* : " Text : "Grid index out of range" *Trans* : " Text : "Fixed column count must be less than column count" *Trans* : " Text : "Fixed row count must be less than row count" *Trans* : " Text : "Cannot insert or delete rows from grid" *Trans* : " Text : "Invalid property value" *Trans* : " Text : "Invalid input value" *Trans* : " Text : "Invalid input value. Use escape key to abandon changes" *Trans* : " Text : "Printing in progress" *Trans* : " Text : "Printer selected is not valid" *Trans* : " Text : "%s on %s" *Trans* : " Text : "GroupIndex cannot be less than a previous menu item's GroupIndex" *Trans* : " Text : "Cannot create form. No MDI forms are currently active" *Trans* : " Text : "Can only modify an image if it contains a bitmap" *Trans* : " Text : "A control cannot have itself as its parent" *Trans* : " Text : "&Close" *Trans* : " Text : "Abort" *Trans* : " Text : "Invalid ImageList Index" *Trans* : " Text : "Failed to read ImageList data from stream" *Trans* : " Text : "Error creating window device context" *Trans* : " Text : "Error creating window class" *Trans* : " Text : "Cannot focus a disabled or invisible window" *Trans* : " Text : "Control '%s' has no parent window" *Trans* : " Text : "Cannot hide an MDI Child Form" *Trans* : " Text : "Cannot change Visible in OnShow or OnHide" *Trans* : " Text : "Cannot make a visible window modal" *Trans* : " Text : "Scrollbar property out of range" *Trans* : " Text : "%s property out of range" *Trans* : " Text : "Menu index out of range" *Trans* : " Text : "Menu inserted twice" *Trans* : " Text : "Sub-menu is not in menu" *Trans* : " Text : "Not enough timers available" *Trans* : " Text : "Printer is not currently printing" *Trans* : " Text : "Error reading %s.%s: %s" *Trans* : " Text : "Ancestor for '%s' not found" *Trans* : " Text : "Bitmap image is not valid" *Trans* : " Text : "Icon image is not valid" *Trans* : " Text : "Metafile is not valid" *Trans* : " Text : "Invalid pixel format" *Trans* : " Text : "Scan line index out of range" *Trans* : " Text : "Cannot change the size of an icon" *Trans* : " Text : "Invalid operation on TOleGraphic" *Trans* : " Text : "Unknown picture file extension (.%s)" *Trans* : " Text : "Unsupported clipboard format" *Trans* : " Text : "Out of system resources" *Trans* : " Text : "Canvas does not allow drawing" *Trans* : " Text : "Invalid image size" *Trans* : " Text : "Invalid ImageList" *Trans* : " Text : "Unable to Replace Image" *Trans* : " Text : "Can't write to a read-only resource stream" *Trans* : " Text : "Class %s not found" *Trans* : " Text : "Resource %s not found" *Trans* : " Text : "List index out of bounds (%d)" *Trans* : " Text : "List capacity out of bounds (%d)" *Trans* : " Text : "List count out of bounds (%d)" *Trans* : " Text : "Operation not allowed on sorted string list" *Trans* : " Text : "String list does not allow duplicates" *Trans* : " Text : "A component named %s already exists" *Trans* : " Text : "''%s'' is not a valid component name" *Trans* : " Text : "A class named %s already exists" *Trans* : " Text : "Invalid property path" *Trans* : " Text : "Property does not exist" *Trans* : " Text : "Property is read-only" *Trans* : " Text : "Thu" *Trans* : " Text : "Fri" *Trans* : " Text : "Sat" *Trans* : " Text : "Sunday" *Trans* : " Text : "Monday" *Trans* : " Text : "Tuesday" *Trans* : " Text : "Wednesday" *Trans* : " Text : "Thursday" *Trans* : " Text : "Friday" *Trans* : " Text : "Saturday" *Trans* : " Text : "Cannot assign a %s to a %s" *Trans* : " Text : "Cannot create file %s" *Trans* : " Text : "Cannot open file %s" *Trans* : " Text : "Stream read error" *Trans* : " Text : "Stream write error" *Trans* : " Text : "Out of memory while expanding memory stream" *Trans* : " Text : "January" *Trans* : " Text : "February" *Trans* : " Text : "March" *Trans* : " Text : "April" *Trans* : " Text : "May" *Trans* : " Text : "June" *Trans* : " Text : "July" *Trans* : " Text : "August" *Trans* : " Text : "September" *Trans* : " Text : "October" *Trans* : " Text : "November" *Trans* : " Text : "December" *Trans* : " Text : "Sun" *Trans* : " Text : "Mon" *Trans* : " Text : "Tue" *Trans* : " Text : "Wed" *Trans* : " Text : "Access violation at address %p in module '%s'. %s of address %p" *Trans* : " Text : "Win32 Error. Code: %d.\n%s" *Trans* : " Text : "A Win32 API function failed" *Trans* : " Text : "Application is not licensed to use this feature" *Trans* : " Text : "Jan" *Trans* : " Text : "Feb" *Trans* : " Text : "Mar" *Trans* : " Text : "Apr" *Trans* : " Text : "Jun" *Trans* : " Text : "Jul" *Trans* : " Text : "Aug" *Trans* : " Text : "Sep" *Trans* : " Text : "Oct" *Trans* : " Text : "Nov" *Trans* : " Text : "Dec" *Trans* : " Text : "Format '%s' invalid or incompatible with argument" *Trans* : " Text : "No argument for format '%s'" *Trans* : " Text : "Invalid variant type conversion" *Trans* : " Text : "Invalid variant operation" *Trans* : " Text : "Variant method calls not supported" *Trans* : " Text : "Read" *Trans* : " Text : "Write" *Trans* : " Text : "Format string too long" *Trans* : " Text : "Error creating variant array" *Trans* : " Text : "Variant is not an array" *Trans* : " Text : "Variant array index out of bounds" *Trans* : " Text : "External exception %x" *Trans* : " Text : "Assertion failed" *Trans* : " Text : "Interface not supported" *Trans* : " Text : "%s (%s, line %d)" *Trans* : " Text : "Abstract Error" *Trans* : " Text : "Division by zero" *Trans* : " Text : "Range check error" *Trans* : " Text : "Integer overflow" *Trans* : " Text : "Invalid floating point operation" *Trans* : " Text : "Floating point division by zero" *Trans* : " Text : "Floating point overflow" *Trans* : " Text : "Floating point underflow" *Trans* : " Text : "Invalid pointer operation" *Trans* : " Text : "Invalid class typecast" *Trans* : " Text : "Access violation at address %p. %s of address %p" *Trans* : " Text : "Stack overflow" *Trans* : " Text : "Control-C hit" *Trans* : " Text : "Privileged instruction" *Trans* : " Text : "Operation aborted" *Trans* : " Text : "Exception %s in module %s at %p.\n%s%s" *Trans* : " Text : "Application Error" *Trans* : " Text : "'%s' is not a valid integer value" *Trans* : " Text : "'%s' is not a valid floating point value" *Trans* : " Text : "'%s' is not a valid date" *Trans* : " Text : "'%s' is not a valid time" *Trans* : " Text : "'%s' is not a valid date and time" *Trans* : " Text : "Invalid argument to time encode" *Trans* : " Text : "Invalid argument to date encode" *Trans* : " Text : "Out of memory" *Trans* : " Text : "I/O error %d" *Trans* : " Text : "File not found" *Trans* : " Text : "Invalid filename" *Trans* : " Text : "Too many open files" *Trans* : " Text : "File access denied" *Trans* : " Text : "Read beyond end of file" *Trans* : " Text : "Disk full" *Trans* : " Text : "Invalid numeric input" *Trans* : " ; Text : "MDI Child" *Trans* : " Text : "Italy Zone 1" *Trans* : " Text : "Italy Zone 2" *Trans* : " Text : "VICMAP-TM" *Trans* : " Text : "Brunton/Silva" *Trans* : " Text : "Stop Bits" *Trans* : " Text : "APB" *Trans* : " Text : "RMB" *Trans* : " Text : "RMC" *Trans* : " Text : "BWC" *Trans* : " Text : "User 1" *Trans* : " Text : "User 2" *Trans* : " Text : "User 3" *Trans* : " Text : "ID" *Trans* : " Text : "Map Grid Zone" *Trans* : " Text : "TM User Grid" *Trans* : " Text : "Irish Grid" *Trans* : " Text : "Swiss Grid" *Trans* : " Text : "Italy 1 Grid" *Trans* : " Text : "Italy 2 Grid" *Trans* : " Text : "Albers Projection" *Trans* : " Text : "Elevation Configuration" *Trans* : " Text : "Use Elevation Data" *Trans* : " Text : " 3D Map Parameters " *Trans* : " Text : "Number Vertices" *Trans* : " Text : "Elevation Adjust (m)" *Trans* : " Text : "Elevation Display at Startup" *Trans* : " Text : "Filter Elevation" *Trans* : " Text : "Exclude Neat Line" *Trans* : " Text : "Save Small Image Section in 3D File" *Trans* : " Text : "DEM File Paths" *Trans* : " Text : " Elevation Data Type and Path " *Trans* : " Text : "Gtopo30" *Trans* : " Text : "USA DEM 250" *Trans* : " Text : "Grid ASCII" *Trans* : " Text : "USA DEM 24K" *Trans* : " Text : "Globe (ArcView)" *Trans* : " Text : "3D Map Control" *Trans* : " Text : "Draw Box to set limit of 3D map" *Trans* : " Text : "Create the 3D map" *Trans* : " Text : "999999" *Trans* : " Text : "Select Full Map" *Trans* : " Text : "Select Inside Corner Markers (Neat Line)" *Trans* : " Text : "Select Viewing Window" *Trans* : " Text : "Set 3D grid size in pixels" *Trans* : " Text : "32" *Trans* : " Text : "64" *Trans* : " Text : "128" *Trans* : " Text : "256" *Trans* : " Text : "Elevation" *Trans* : " Text : "Resolution" *Trans* : " Text : "OziExplorer3D" *Trans* : " Text : "Scanning DEM Files" *Trans* : " Text : "Auto Hide" *Trans* : " Text : "Open Index Map File" *Trans* : " Text : "Save Changes to the Map" *Trans* : " Text : "Select Track Points (Track 1)" *Trans* : " Text : "New Blank Map (Auto Scale)" *Trans* : " Text : "3D/Elevation" *Trans* : " Text : "Elevation Profile" *Trans* : " Text : "Show Elevation Display" *Trans* : " Text : "Get Waypoints from GPS (nmea method)" *Trans* : " Text : "Get Waypoints from GPS (fast method)" *Trans* : " Text : "Get Routes from GPS (nmea method)" *Trans* : " Text : "Get Map Profile from GPS" *Trans* : " Text : "Send Map Profile to GPS" *Trans* : " Text : "Reset GPS" *Trans* : " Text : "Delete Waypoints and Routes" *Trans* : " Text : "Delete Routes" *Trans* : " Text : "Enter RIK Registration" *Trans* : " Text : "Create a Waypoint at Tp" *Trans* : " Text : "Map Profile" *Trans* : " Text : "Create the profile" *Trans* : " Text : "Click on the Map to select Start and End points" *Trans* : " Text : " Profile Start && End " *Trans* : " Text : "Set Start" *Trans* : " Text : "Set End" *Trans* : " Text : "View the Profile" *Trans* : " Text : "Draw Box to Select Track Points" *Trans* : " Text : "Image Files (BMP,TIF,JPG,PNG,KAP,OZF,ECW,SID)|*.BMP;*.TIF;*.JPG;*.PNG;*.KAP;*.NOS;*.GIF;*.OZF;*.RML;*.HDR;*.OZF2;*.ECW;*.SID|All Files (*.*)|*.*" *Trans* : " Text : "Image Files (TIF,BMP,JPG,PNG,SID,OZF,OZF2)|*.BMP;*.TIF;*.JPG;*.PNG;*.SID;*.OZF;*.OZF2" *Trans* : " Text : "Email : info@oziexplorer.com" *Trans* : " Text : "Refresh Plotted Position" *Trans* : " Text : "Show the File Attachment Dialog" *Trans* : " Text : "Attachments" *Trans* : " Text : "Equidistant Conic Setup" *Trans* : " Text : "Show/Hide this Point Set on Map" *Trans* : " Text : "Swap Maps" *Trans* : " Text : "Size 1 (small)" *Trans* : " Text : "Size 2" *Trans* : " Text : "Size 3" *Trans* : " Text : "Size 4" *Trans* : " Text : "Size 5" *Trans* : " Text : "Size 6" *Trans* : " Text : "Size 7 (large)" *Trans* : " Text : "Track Main Map" *Trans* : " Text : "Turn off Active Track Points" *Trans* : " Text : "Move Selected Track to track 1" *Trans* : " Text : "Sort List by Description" *Trans* : " Text : "Check the Web site for information about OziExplorer" *Trans* : " Text : "Waypoint Attachments" *Trans* : " Text : "All files (*.*)|*.*|Html Files (*.htm;*.html)|*.htm;*.html|Image Files (*.bmp,*.jpg)|*.bmp;*.jpg|Image Files (*.gif,*.bmp,*.jpg,*.tif,*.png)|*.gif;*.bmp;*.jpg;*.tif;*.png|Doc Files (*.doc)|*.doc|Text Files (*.txt)|*.txt|Wav Files (*.wav)|*.wav" *Trans* : " Text : "Proximity / Route Attachment" *Trans* : " Text : "BMP Files (*.bmp)|*.bmp" *Trans* : " Text : "Proximity / Route Symbol" *Trans* : " Text : "Proximity" *Trans* : " Text : "Proximity & Route" *Trans* : " Text : "Proximity / Route" *Trans* : " Text : "Top Left" *Trans* : " Text : "Top Right" *Trans* : " Text : "Bottom Right" *Trans* : " Text : "Bottom Left" *Trans* : " Text : "Symbol Position" *Trans* : " Text : "OziMrSID.dll not found" *Trans* : " Text : "The Specified Number of Vertices will be exceeded." *Trans* : " Text : "The number can be adjusted in Elevation Configuration up to the Maximum limit." *Trans* : " Text : "The Shareware/Demo and Trial versions of OziExplorer only allow a 3D Map to be created when the map is at 100% zoom." *Trans* : " Text : "[Use Elevation Data] is turned off in OziExplorer3D Configuration." *Trans* : " Text : "The Grid spacing must be 2,4,8,16,32,64,128 or 256" *Trans* : " Text : "The 3D map Limits have not been selected." *Trans* : " Text : "The Map has changes which have not been saved. These will not be included in the 3D Map." *Trans* : " Text : "The image type" *Trans* : " Text : "is not supported in this Version" *Trans* : " Text : "Grid Zone not specified" *Trans* : " Text : "E00 File Import/Export Options" *Trans* : " Text : "Grid Zone" *Trans* : " Text : "There is no Vehicle Selected" *Trans* : " Text : "Vehicle not found" *Trans* : " Text : "Delete the Selected Vehicles" *Trans* : " Text : "Meters per Pixel" *Trans* : " Text : "Feet per Grid" *Trans* : " Text : "Meters per Grid" *Trans* : " Text : "The User name or Serial Number is not correct" *Trans* : " Text : "This profile will generate more than the limit of 10,000 track points and will be aborted." *Trans* : " Text : "The Start and End points have not been specified." *Trans* : " Text : "Elevation profile" *Trans* : " Text : "Feet per Pixel" *Trans* : " Text : "Image Details" *Trans* : " Text : "Please configure the GPS Data Output to MAP PROFILE" *Trans* : " Text : "The GPS will be Reset to Factory Defaults" *Trans* : " Text : "All Data (including waypoints, routes and tracks) and Configuration stored in the GPS will be Deleted" *Trans* : " Text : "Are you sure" *Trans* : " Text : "Send the Map Profile to the GPS" *Trans* : " Text : "The Map Profile is sent from Track 1" *Trans* : " Text : "Italy 1" *Trans* : " Text : "Italy 2" *Trans* : " Text : "Some Magellans do not like to use Baud Rates greater than 9600 even though they can be selected in the GPS." *Trans* : " Text : "Brunton/Silva GPS receivers can only use baud rates of 4800 or 19200." *Trans* : " Text : "Map Profile Point" *Trans* : " Text : "Map Profile Sent" *Trans* : " Text : "You may need to configure the GPS Data Output to WPTS+ROUTES" *Trans* : " Text : "You may need to configure the GPS Data Output to TRACK" *Trans* : " Text : "You may need to configure the GPS Data Output to MAP PROFILE" *Trans* : " Text : "Get Map Profile Point from the GPS" *Trans* : " Text : "Send Route Header to the GPS" *Trans* : " Text : "The Waypoints used in the Routes must already be stored in the GPS" *Trans* : " Text : "The Waypoints used in the Routes must already be loaded on the Map" *Trans* : " Text : "Delete Waypoint" *Trans* : " Text : "Acknowledge Terminate NPP" *Trans* : " Text : "Rejected" *Trans* : " Text : "Routes Deleted" *Trans* : " Text : "Get Route Header from the GPS" *Trans* : " Text : "Get Route Numbers from the GPS" *Trans* : " Text : "Options - Night Vision (Gray)" *Trans* : " Text : "Options - Set Intensity (Cycle)" *Trans* : "Opcje - ustal intensywność (cykle) Text : "3D - Show Elevation" *Trans* : "3d - pokaż wysokość n.p.m. Text : "3D - Elevation Configuration" *Trans* : " Text : "3D - Elevation Profile" *Trans* : " Text : "3D - 3D Map Control" *Trans* : " Text : "Other - Track 1 Quick Clear" *Trans* : " Text : "Options - Night Vision (Blue)" *Trans* : " Text : "Options - Night Vision (Red)" *Trans* : " Text : "Due to Licensing restrictions the map cannot be printed at this Zoom level." *Trans* : " Text : "No Height Data was found" *Trans* : " Text : "Check the Elevation Configuration to make sure settings are correct" *Trans* : " Text : "Make sure you have Elevation Data available that covers the area" *Trans* : "Upewnij się, że masz dane o wysokości n.p.m. dla tego obszaru Text : "Reversed" *Trans* : "Odwrócone Text : "Value must be between %d and %d" *Trans* : "Wartość musi być pomiędzy %d i %d ; Text : "Anchor Alarm" *Trans* : " Text : " " *Trans* : " Text : "Reset Anchor position to current position" *Trans* : " Text : "Reset" *Trans* : " Text : "Turn the Sound On/Off" *Trans* : " Text : "Sound" *Trans* : " Text : "Mins" *Trans* : " Text : "Secs" *Trans* : " Text : "Radius" *Trans* : " Text : "Show Track" *Trans* : " Text : "Averaging Time" *Trans* : " Text : "Track Ageing" *Trans* : " Text : "Sound Files (*.wav)|*.wav" *Trans* : " Text : "Alarm Sound File" *Trans* : " Text : "On" *Trans* : " Text : "VICGRID" *Trans* : " Text : "Writes Gps Upload/Download data to a file" *Trans* : " Text : "Debug" *Trans* : " Text : " NMEA " *Trans* : " Text : "NMEA Check Sum" *Trans* : " Text : "Use Depth Sentence" *Trans* : " Text : "File : " *Trans* : " Text : "Find Maps that contain the location of the selected position" *Trans* : " Text : "Plot the location of the specified position on the Map" *Trans* : " Text : "Plot" *Trans* : " Text : "NIMA DTED" *Trans* : " Text : "Change Properties for All Selected Events" *Trans* : " Text : "Change Fore Color" *Trans* : " Text : "Change Back Color" *Trans* : " Text : "Change Symbol Size" *Trans* : " Text : "Gps Fix Data" *Trans* : " Text : "Satellite View" *Trans* : " Text : "Satellite Data" *Trans* : " Text : "Position Data" *Trans* : " Text : "UTC Date" *Trans* : " Text : "UTC Time" *Trans* : " Text : "Show Map List at Pointer" *Trans* : " Text : "Select OziExplorer Language" *Trans* : " Text : "Select the Language to use with OziExplorer" *Trans* : " Text : "Lock/Unlock the dragging of Map Objects" *Trans* : " Text : "All DRG Maps on a CD or in a Folder" *Trans* : " Text : "All BSB or NOS/GEO Charts on a CD or in a Folder" *Trans* : " Text : "Change Language" *Trans* : " Text : "Re-index Map Files" *Trans* : " Text : "Add or Drag Map Object" *Trans* : " Text : "Drag Map Objects" *Trans* : " Text : "Log Track To Memory / Map" *Trans* : " Text : "Log Track to File" *Trans* : " Text : "Change Track Log File" *Trans* : " Text : "Clear Track Log File" *Trans* : " Text : "Load USR File" *Trans* : " Text : "Save USR File" *Trans* : " Text : " How it will Look at 100% Zoom " *Trans* : " Text : "To set up the NMEA Simulator'#13#10'1. Click on this Button'#13#10'2. Click on the map at the position you want to Start'#13#10'3. Start NMEA Communication with the GPS" *Trans* : " Text : "Image Files (BMP,TIF,JPG,PNG,KAP,CAP,OZF,ECW,SID)|*.BMP;*.TIF;*.JPG;*.PNG;*.KAP;*.CAP;*.NOS;*.GIF;*.OZF;*.RML;*.HDR;*.OZF2;*.ECW;*.SID;*.ECWP;*.OZFX2|All Files (*.*)|*.*" *Trans* : " Text : "Export Text File" *Trans* : " Text : "Image Files (tif,bmp,jpg,png,sid,ecw,ozf,ozf2)|*.BMP;*.TIF;*.JPG;*.PNG;*.SID;*.OZF;*.OZF2;*.ECW" *Trans* : " Text : "BSB Files (kap,cap,nos)|*.kap;*.cap;*.nos" *Trans* : " Text : "Lowrance Files (*.usr)|*.usr" *Trans* : " Text : "Load Lowrance USR File" *Trans* : " Text : "Save Lowrance USR File" *Trans* : " Text : "Message" *Trans* : " Text : "Change Properties for All Selected Track Points" *Trans* : " Text : "Add Altitude to Selected Track Points" *Trans* : " Text : "Enter Track Log File Name" *Trans* : " Text : "Log File name" *Trans* : " Text : "Select New Back Color" *Trans* : " Text : "Select Font Style" *Trans* : " Text : "Enter New Font Size" *Trans* : " Text : "Select New Fore Color" *Trans* : " Text : "Select Pointer Direction" *Trans* : " Text : "Enter New Proximity" *Trans* : " Text : "Enter New Symbol Size" *Trans* : " Text : "Change Font Size" *Trans* : " Text : "Change Font Style" *Trans* : " Text : "Change Pointer Direction" *Trans* : " Text : "Change Proximity" *Trans* : " Text : "Add Altitude to Selected Waypoints" *Trans* : " Text : "The next time you start OziExplorer you will be asked to choose the language." *Trans* : " Text : "These Files could not be processed - the File is not in the expected Format." *Trans* : " Text : "The Maptech BSB Version 4 Dlls were not found or could not be loaded." *Trans* : " Text : "The Maptech BSB Version 4 chart could not be opened." *Trans* : " Text : "Loading USR File" *Trans* : " Text : "USR File Loaded" *Trans* : " Text : "Saving USR File" *Trans* : " Text : "USR File Saved" *Trans* : " Text : "The georeferencing in this map specifies the map projection as \"LOCAL\" which is not a true projection and cannot be imported using the ECW Import option, use the DRG Import option instead." *Trans* : " Text : "Averaging" *Trans* : " Text : "Alarm is OFF" *Trans* : " Text : "Sound is OFF" *Trans* : " Text : "This CAL file generated an error - it may be faulty or in an unsupported format." *Trans* : " Text : "There are no Events Selected" *Trans* : " Text : "You have selected to change the GPS Upload/Download Datum from WGS 84 but you have a Garmin GPS selected. Garmins always upload and download positions in the WGS 84 datum." *Trans* : " Text : "This is just a warning the Datum can still be changed if new models require it." *Trans* : " Text : "This model of GPS does not have a Symbol Set defined for use in OziExplorer." *Trans* : " Text : "Select a previously created Symbol set or Create a new set to suit this model by pressing the Create button which is located above the GPS Symbol Set Combo Box." *Trans* : " Text : "From Track and To Track numbers cannot be the same" *Trans* : " Text : "Clear ALL the Waypoints, Events, Routes, Tracks and Points from the Map" *Trans* : " Text : "Mov Map - Log Track to File" *Trans* : " Text : "Mov Map - Log Track to Memory / Map" *Trans* : " Text : "Mov Map - Anchor Alarm" *Trans* : " Text : "Indexing Maps" *Trans* : " Text : "42 Symbols" *Trans* : " Text : "File Attachment not found." *Trans* : " Text : "This Map image is too large to save." *Trans* : " Text : "Estimated" *Trans* : " Text : "Input" *Trans* : " Text : "Simulation" *Trans* : " Text : "Only the Registered version can Calibrate Maps using Projections" *Trans* : " Text : "Waiting for NMEA data ..." *Trans* : " Text : "No GPS Fix data in PVT mode" *Trans* : " ; Text : "Maptech RML, PCX, 024 or AER Charts" *Trans* : " ; Memo : "Use the Image File Path Combo box above to select the Path (Drive " Memo : "and Folder) where the image files of the maps reside - this may be a " Memo : "CD or Hard Disk. The Maps have a HDR, RML, 024 or AER " Memo : "extension." Memo : "" Memo : "Use the Map File Path to specify where the imported maps are to be " Memo : "placed - note : new folders can be created." Memo : "" Memo : "After selecting the Paths press the Import button to proceed." *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans??: " *Trans??: " ; Text : "Image Files (BMP,TIF,JPG,PNG,KAP,CAP,OZF,ECW,SID)|*.BMP;*.TIF;*.JPG;*.PNG;*.KAP;*.CAP;*.NOS;*.GIF;*.OZF;*.RML;*.HDR;*.OZF2;*.ECW;*.SID;*.ECWP;*.OZFX2;*.024;*.100;*.250;*.AER|All Files (*.*)|*.*" *Trans* : " Text : "The Shareware/Demo version can only load image files in the BMP format" *Trans* : " Text : "The Purchased and Trial versions can load image files in all the supported formats" *Trans* : " Text : "This command not available in the Shareware or Trail versions." *Trans* : " Text : "The Maptech Dlls were not found or could not be loaded." *Trans* : " Text : "The Maptech chart could not be opened." *Trans* : " Text : "No Maptech HDR, RML, 024 or AER files found" *Trans* : " Text : "File Not Found" *Trans* : " Text : "Path Not Found" *Trans* : " Text : "Access Denied" *Trans* : " Text : "Insufficient Memory" *Trans* : " Text : "Media Is Write Protected" *Trans* : " Text : "Device Not Ready" *Trans* : " Text : "File In Use" *Trans* : " Text : "Disk Full" *Trans* : " Text : "Windows Version Incorrect" *Trans* : " Text : "Not A Windows Or MSDos Program" *Trans* : " Text : "Corrupt File Or Disk" *Trans* : " Text : "Corrupt Registry" *Trans* : " Text : "General Failure" *Trans* : " Text : "The Trial Version of OziExplorer will only run for 1 hour" *Trans* : " Text : "continuous and will now be terminated." *Trans* : " ; Text : "Garmin USB" *Trans* : " Text : "Auto Shrink Window on Map Open" *Trans* : " Text : "Cape York Maps" *Trans* : " Text : "Click on Map to open" *Trans* : " Text : "Cape York" *Trans* : " Text : ""The Tip"" *Trans* : " Text : "Simpson Desert Maps" *Trans* : " Text : "Simpson Desert 1:500,000 Scale" *Trans* : " Text : "1:1,250,000 Scale" *Trans* : " Text : "Image Files (BMP,TIF,JPG,PNG,KAP,CAP,OZF,ECW,SID)|*.BMP;*.TIF;*.JPG;*.PNG;*.KAP;*.CAP;*.NOS;*.GIF;*.OZF;*.RML;*.HDR;*.OZF2;*.ECW;*.SID;*.ECWP;*.OZFX2;*.024;*.100;*.250;*.AER;*.OZFX3|All Files (*.*)|*.*" *Trans* : " Text : "Select Area to print on the main Map" *Trans* : " Text : "Window - Fit to page(s)" *Trans* : " Text : "Map - Fit to page(s)" *Trans* : " Text : "Lock the aspect ratio when selecting region on the Map" *Trans* : " Text : "Lock aspect ratio" *Trans* : " Text : "Preferences" *Trans* : " Text : "Map printing Preview" *Trans* : " Text : "Preview" *Trans* : " Text : "Filter Index" *Trans* : " Text : "Number Points" *Trans* : " Text : "The Trial version cannot load ozfx2 map images." *Trans* : " Text : "PC OziExplorer cannot load protected ozfx3 map images." *Trans* : " Text : "This ozfx3 format version is not recognised, you will need to upgrade your version of OziExplorer." *Trans* : " Text : "Cannot load Windows USB support dll (SetupApi.dll)" *Trans* : " Text : "No PVT data received" *Trans* : " Text : "A Garmin USB GPS could not be found" *Trans* : " Text : "Type Field" *Trans* : " Text : "To use USB transfer you must tick the Garmin USB checkbox on the COM Tab of this Configuration." *Trans* : " Text : "If using the GPS with the USB cable for Moving map then you will also need to tick the Use PVT for Garmin instead of NMEA checkbox." *Trans* : " Text : "The model of GPS you have selected does not have Garmin USB ability." *Trans* : " Text : "This model supports USB data transfer." *Trans* : " Text : "If the model supports USB data transfer then follow the instructions below." *Trans* : " Text : "License information for %s not found. You cannot use this control in design mode" *Trans* : " Text : "List index [%d] out of bounds..." *Trans* : " Text : "No scrollbar specified when attempting to create TElScrollBarStyles instance" *Trans* : " Text : "ElTree item index out of bounds." *Trans* : " Text : "ElTree item not specified" *Trans* : " Text : "Can't move Item to one of its subitems." *Trans* : " Text : "OLE control activation failed" *Trans* : " Text : "Could not obtain OLE control window handle" *Trans* : " Text : "License information for %s is invalid" *Trans* : " Text : "The number of waypoints you are uploading to the GPS exceeds the capacity of the GPS." *Trans* : " Text : "Total Number of Waypoints :" *Trans* : " Text : "Number to be uploaded to the GPS :" *Trans* : " Text : "Reading Record" *Trans* : " Text : "Selected area too large." *Trans* : " Text : "The area of map which can be printed is restricted by the license conditions for this map type." *Trans* : " ; Text : "Set the Total Distance Value" *Trans* : " Text : "Loading Kompass Map" *Trans* : " Text : "Thank you for choosing a KOMPASS Map! Further information about our products can be found at" *Trans* : " Text : "Kompass Map Import" *Trans* : " Text : "Kompass Map Path" *Trans* : " ; Memo : "Use the Kompass Map Path Combo box above to select the Drive " Memo : "and Folder where the image files of the maps reside - this may be " Memo : "a CD or Hard Disk. These files have a .GVG extension, the name" Memo : "of the file is most likely map.gvg and is in the DKL folder of the CD." Memo : "" Memo : "Use the Map File Path to specify where the imported map is to be " Memo : "placed - note : new folders can be created." Memo : "" Memo : "After selecting the Paths press the Import button to proceed." Memo : "" *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans??: " *Trans??: " ; Text : "Kompass Maps" *Trans* : " Text : "CFS Email Moving Map Track" *Trans* : " Text : "Tracks to Polygons" *Trans* : " Text : "Image Files (BMP,TIF,JPG,PNG,KAP,CAP,OZF,ECW,SID)|*.BMP;*.TIF;*.JPG;*.PNG;*.KAP;*.CAP;*.NOS;*.GIF;*.OZF;*.RML;*.HDR;*.OZF2;*.ECW;*.SID;*.ECWP;*.OZFX2;*.024;*.100;*.250;*.AER;*.OZFX3;*.gvg|All Files (*.*)|*.*" *Trans* : " Text : "Key Code" *Trans* : " Text : "Permanently sort Waypoints into Name order" *Trans* : " Text : "The Track Log File cannot be created - the File Path or Name may be invalid." *Trans* : " Text : "RSA encoding error: too much data for block" *Trans* : " Text : "RSA decoding error: Block too small" *Trans* : " Text : "RSA decoding error: Block too large" *Trans* : " Text : "RSA decoding error: Invalid block type" *Trans* : " Text : "RSA decoding error: Invalid block format" *Trans* : " Text : "2.07" *Trans* : " Text : "Buffer not assigned" *Trans* : " Text : "No Number" *Trans* : " Text : "Subtraction error" *Trans* : " Text : "Quotient process error" *Trans* : " Text : "Factor is zero" *Trans* : " Text : "Invalid Asymmetric Key" *Trans* : " Text : "Invalid RSA Key" *Trans* : " Text : "RSA key pair failure" *Trans* : " Text : "Caution - This may not be the correct map for this Map file. Is the correct CD loaded." *Trans* : " Text : "Kompass Maps have a limit of no greater than A3 size paper for map printing." *Trans* : " Text : "The Kompass map DLL could not be found. It can be downloaded from www.oziexplorer.com" *Trans* : " ; Text : "Caption" *Trans* : " Text : "Print Caption" *Trans* : " Text : "Note" *Trans* : " ; Text : "(VG94) VICGRID94 Victoria Australia" *Trans* : " Text : "VICGRID94" *Trans* : " Text : "Dialog" *Trans* : " Text : " Destination Directory" *Trans* : " Text : "c:\OziExplorer" *Trans* : " ; Memo : "A previous installation of OziExplorer could not be found." Memo : "" Memo : "The Destination Directory shown is the default. To install to the " Memo : "default directory, click OK." Memo : "" Memo : "If you know the location of a previous installation use the Browse " Memo : "button to select the directory." Memo : "" Memo : "You can choose not to install by clicking Cancel to exit Setup." *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans??: " *Trans??: " ; Text : "WayPoint Files (*.upt)|*.upt" *Trans* : " Text : "Open Waypoint File" *Trans* : " Text : "Merge into Waypoint File" *Trans* : " Text : "Track Files (*.log)|*.log" *Trans* : " Text : "Open Track File" *Trans* : " Text : "The map image was not found in the folder tree specified." *Trans* : " Text : "Image File :" *Trans* : " Text : "OziExplorer must be closed and restarted to Activate the Registration" *Trans* : " Text : "A map image has been found, after this dialog is closed the map will be opened, check that it is the correct image for this map and save the map file to save the new image location." *Trans* : " Text : "If the image is not correct do not save the map file." *Trans* : " Text : "Browse" *Trans* : " Text : "Maps created by Mapmerge cannot be saved to other formats" *Trans* : " Text : "AIS Configuration" *Trans* : " Text : "Use AIS System" *Trans* : " Text : " Ship Database " *Trans* : " Text : "Delete if older than (days)" *Trans* : " Text : "Ignore if older than (mins)" *Trans* : " Text : "Flag if older than (mins)" *Trans* : " Text : "Loaded Map Only" *Trans* : " Text : "Ship Track Length" *Trans* : " Text : "Nautical Miles / Meters" *Trans* : " Text : "Nautical Miles / Feet" *Trans* : " Text : "Kilometers / Meters" *Trans* : " Text : "Miles / Feet" *Trans* : " Text : "AIS Distance Units" *Trans* : " Text : "AIS Speed Units" *Trans* : " Text : "Ship Size" *Trans* : " Text : "AIS Input" *Trans* : " Text : "TCP/IP Host" *Trans* : " Text : "TCP/IP Port" *Trans* : " Text : "Use Com Port Input" *Trans* : " Text : "Use TCP/IP Input" *Trans* : " Text : "Ship Label" *Trans* : " Text : " Show on Label " *Trans* : " Text : "Ship Name" *Trans* : " Text : "COG" *Trans* : " Text : "Range" *Trans* : " Text : "CPA" *Trans* : " Text : "Time to CPA" *Trans* : " Text : "Opaque" *Trans* : " Text : "Label Style" *Trans* : " Text : "Never" *Trans* : " Text : "Always" *Trans* : " Text : "Less than Range" *Trans* : " Text : "CPA Alarm" *Trans* : " Text : "Show Label" *Trans* : " Text : "Label Range" *Trans* : " Text : " Closest Point of Approach (CPA)" *Trans* : " Text : "Alarm On" *Trans* : " Text : "Minimum CPA" *Trans* : " Text : "Minimum Time to CPA" *Trans* : " Text : "Show CPA Graphics" *Trans* : " Text : "CPA Graphics Range" *Trans* : " Text : "AIS Control" *Trans* : " Text : "Open AIS Configuration" *Trans* : " Text : "Quiet the CPA Alarm" *Trans* : " Text : "Manually Start the AIS communication" *Trans* : " Text : "Track Selected Vehicle" *Trans* : " Text : "APRS Configuration" *Trans* : " Text : "APRS Distance Units" *Trans* : " Text : "APRS Speed Units" *Trans* : " Text : "Mobile Only" *Trans* : " Text : "Symbol Scale" *Trans* : " Text : "APRS Input" *Trans* : " Text : "Login Text" *Trans* : " Text : "Login Delay (ms)" *Trans* : " Text : "cAisTcpipHost2" *Trans* : " Text : "APRS Label" *Trans* : " Text : "Call Sign" *Trans* : " Text : "APRS Control (Experimental)" *Trans* : " Text : "Open APRS Configuration" *Trans* : " Text : "Start/Stop the APRS System" *Trans* : " Text : "Display Selected Item details" *Trans* : " Text : "Display" *Trans* : " Text : "Display Location of Selected Item on Current Map" *Trans* : " Text : "Find Map for Selected Item" *Trans* : " Text : "Track Selected Item on the Map" *Trans* : " Text : "Browse for Folder" *Trans* : " Text : "Selected Folder :" *Trans* : " Text : "Double click on a folder to select and open the folder" *Trans* : " Text : "Lower Case Chars" *Trans* : " Text : "Bluetooth GPS" *Trans* : " Text : "USB Mouse GPS" *Trans* : " Text : "Serial Mouse GPS" *Trans* : " Text : "Scan the PC ports looking for a GPS" *Trans* : " Text : "Find GPS Port" *Trans* : " Text : "28" *Trans* : " Text : "29" *Trans* : " Text : "31" *Trans* : " Text : "34" *Trans* : " Text : "35" *Trans* : " Text : "36" *Trans* : " Text : "37" *Trans* : " Text : "38" *Trans* : " Text : "39" *Trans* : " Text : "41" *Trans* : " Text : "42" *Trans* : " Text : "43" *Trans* : " Text : "44" *Trans* : " Text : "45" *Trans* : " Text : "46" *Trans* : " Text : "47" *Trans* : " Text : "48" *Trans* : " Text : "49" *Trans* : " Text : "Track Tail Defaults " *Trans* : " Text : "Line Style" *Trans* : " Text : "Automatic" *Trans* : " Text : "Other Colors..." *Trans* : " Text : "Text Color Window" *Trans* : " Text : " Track 1 Defaults " *Trans* : " Text : " Track Log File " *Trans* : " Text : "Daily" *Trans* : " Text : "Weekly" *Trans* : " Text : "Monthly" *Trans* : " Text : "New File" *Trans* : " Text : "Creating MapView Image" *Trans* : " Text : "Google Earth" *Trans* : " Text : "Save Waypoints and Tracks to Google Earth Format" *Trans* : " Text : "Select all items" *Trans* : " Text : "Deselect all items" *Trans* : " Text : "View Data in Google Earth" *Trans* : " Text : "View Map Position in Google Earth" *Trans* : " Text : "Include Altitude" *Trans* : " Text : "Transfer Files" *Trans* : " Text : "Select the files to transfer by ticking the box adjacent to the file." *Trans* : " Text : "Select all Files in the List" *Trans* : " Text : "Deselect all Files in the List" *Trans* : " Text : "Refresh the Files List" *Trans* : " Text : "Refresh" *Trans* : " Text : "Show on map after transfer" *Trans* : " Text : "Close the Transfer Files List" *Trans* : " Text : "Press to Start the Transfer of Selected Files" *Trans* : " Text : "Transfer" *Trans* : " Text : "Hint" *Trans* : " Text : "Times New Roman" *Trans* : " Text : "Do not Show this Hint Again" *Trans* : " Text : "Add a waypoint to the Route" *Trans* : " Text : "Show/Hide the Route on the Map" *Trans* : " Text : "Insert a waypoint into the Route" *Trans* : " Text : "Insert Wp" *Trans* : " Text : "Delete the Selected Waypoint from the Route" *Trans* : " Text : "Clear All Waypoints from the Route" *Trans* : " Text : "Route Name" *Trans* : " Text : "Make the Map File Path the same as the Image File Path" *Trans* : " Text : "Save Data to GPX File" *Trans* : " Text : "Save Waypoints and Tracks to GPX Format" *Trans* : " Text : "New Zealand Maps" *Trans* : " Text : "New Zealand 1 : 1,600,000" *Trans* : " Text : "North Island 1 : 350,000" *Trans* : " Text : "New Zealand A4 1 : 5,640,000" *Trans* : " Text : "All Maps" *Trans* : " Text : "Map Product" *Trans* : " Text : "Next More Detailed Map" *Trans* : " Text : "Scale+" *Trans* : " Text : "Next Less Detailed Map" *Trans* : " Text : "Scale-" *Trans* : " Text : "GeoPDF Maps" *Trans* : " Text : "Qct Maps" *Trans* : " Text : "Waypoint Set Control" *Trans* : " Text : "Activate Parameter Screens" *Trans* : " Text : "Load Parameter File" *Trans* : " Text : "Project Manager" *Trans* : " Text : "UBD Find" *Trans* : " Text : "APRS (Experimental)" *Trans* : " Text : "Ship Automatic Identification System (AIS)" *Trans* : " Text : "Copy Track Tail to Track 1" *Trans* : " Text : "Clear Track Tail" *Trans* : " Text : "Download CGIAR Processed SRTM Height Data" *Trans* : " Text : "Download SRTM Height Data (World 3 Sec)" *Trans* : " Text : "Download SRTM Height Data (USA 1 Sec)" *Trans* : " Text : "Load Waypoints and Routes from GPS" *Trans* : " Text : "Load Current Track from GPS" *Trans* : " Text : "Load Saved Tracks from GPS" *Trans* : " Text : "Save Waypoints to GPS" *Trans* : " Text : "Save Track 1 to GPS" *Trans* : " Text : "Save All Tracks to GPS" *Trans* : " Text : "Save Routes to GPS" *Trans* : " Text : "Delete Files from GPS" *Trans* : " Text : "Configure GPS" *Trans* : " Text : "Save USR File (Version 2)" *Trans* : " Text : "Save USR File (Version 3)" *Trans* : " Text : "Get Waypoints from PDA" *Trans* : " Text : "Get Tracks from PDA" *Trans* : " Text : "Get All Waypoints" *Trans* : " Text : "Get Exported Waypoints" *Trans* : " Text : "Get Tracks" *Trans* : " Text : "Get Routes" *Trans* : " Text : "Send Waypoints (Merge)" *Trans* : " Text : "Send Waypoints (Replace)" *Trans* : " Text : "Send Tracks" *Trans* : " Text : "Send Routes" *Trans* : " Text : "Send Current Data" *Trans* : " Text : "Send Current Map" *Trans* : " Text : "Reset All Hints" *Trans* : " Text : "Delete MapView Image Thumbnails" *Trans* : " Text : "Check for Updates Online" *Trans* : " Text : "Check for Updates Now" *Trans* : " Text : "Never Check for Updates" *Trans* : " Text : "Check Daily for Updates" *Trans* : " Text : "Check Weekly for Updates" *Trans* : " Text : "Reset Program Defaults" *Trans* : " Text : "Reset Last Map " *Trans* : " Text : "Reset OziExplorer Configuration" *Trans* : " Text : "Delete OziExplorer System Files Folder" *Trans* : " Text : "Load Project File" *Trans* : " Text : "Import GPX File" *Trans* : " Text : "Import Google Earth (kml) File" *Trans* : " Text : "Tracks to Points" *Trans* : " Text : "Export to GPX File" *Trans* : " Text : "Export to Google Earth" *Trans* : " Text : "BSB Files (kap,cap,nos,eap)|*.kap;*.cap;*.nos;*.eap" *Trans* : " Text : "GPX File (*.gpx)|*.gpx" *Trans* : " Text : "Save GPX File" *Trans* : " Text : "GPX Files (*.gpx,*.xml)|*.gpx;*.xml" *Trans* : " Text : "Load GPX File" *Trans* : " Text : "OziExplorer Project File (*.ozp)|*.ozp" *Trans* : " Text : "Open a Project File" *Trans* : " Text : "KML File (*.kml)|*.kml" *Trans* : " Text : "Save Google Earth KML File" *Trans* : " Text : "Google Earth Files (*.kml)|*.kml" *Trans* : " Text : "Load Google Earth KML File" *Trans* : " Text : "Seemless Map Configuration" *Trans* : " Text : "Max Memory (MBytes)" *Trans* : " Text : "Welcome to OziExplorer" *Trans* : " Text : "Thank you for trying ....." *Trans* : " Text : "Verdana" *Trans* : " Text : "GPS Mapping Software" *Trans* : " Text : "Enter Registration Details" *Trans* : " Text : "Process the entered User Name and Key Code to unlock all the features of OziExplorer" *Trans* : " Text : "Process Registration" *Trans* : " Text : "Continue using the Shareware version" *Trans* : " Text : "Go to OziExplorer web site, click on the Purchase link on the left hand menu of the web site." *Trans* : " Text : "Buy Now" *Trans* : " Text : "File List" *Trans* : " Text : "File Name :" *Trans* : " Text : "Hold "Ctrl" key down while checking the box to select / deselect all files. Files grayed out are not in the correct image format." *Trans* : " Text : "Transfer to" *Trans* : " Text : "Copying files" *Trans* : " Text : "Margin" *Trans* : " Text : "mm" *Trans* : " Text : "inches" *Trans* : " Text : "Create a new project" *Trans* : " Text : "Load a project" *Trans* : " Text : "Save the project" *Trans* : " Text : "Add a file to the project list" *Trans* : " Text : "Delete selected file from the project list" *Trans* : " Text : "Show the Help window" *Trans* : " Text : "Project will automatically load when OziExplorer starts" *Trans* : " Text : "Auto Load this Project" *Trans* : " Text : "Create a Blank Project" *Trans* : " Text : "Create a blank project. Current files will be removed." *Trans* : " Text : "Create a New Project from the Current Map" *Trans* : " Text : "Create a new project from the map and data files loaded " *Trans* : " Text : "Main Map" *Trans* : " Text : "Map Position" *Trans* : " Text : "Track File (multi)" *Trans* : " Text : "Point File (multi)" *Trans* : " Text : "Add File to the Project List" *Trans* : " Text : "Qct Map Import" *Trans* : " Text : "Qct Map Path" *Trans* : " ; ;########: This is a memo field composed of a number of lines ; Try and keep the line length at or below the max line width ; already there. Try and keep the blank lines in the same places. ; Try and not add any new lines. If it is not possible, translate ; it anyway and I will work something out. ; Memo : "Use the Qct Map Path Combo box above to select the Drive " Memo : "and Folder where the image files of the maps reside - this may be " Memo : "a CD or Hard Disk. These files have a .qct extension." Memo : "" Memo : "Use the Map File Path to specify where the imported map is to be " Memo : "placed - note : new folders can be created." Memo : "" Memo : "After selecting the Paths press the Import button to proceed." Memo : "" *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans* : " *Trans??: " *Trans??: " ; ;Leave this line here Text : "Navigate to the Highlighted Waypoint" *Trans* : " Text : "SRTM Height Data" *Trans* : " Text : "Height Files to Download" *Trans* : " Text : "Download" *Trans* : " Text : "Join Tracks Together" *Trans* : " Text : "Split Track Into Sections" *Trans* : " Text : "Remove All Track Sections" *Trans* : " Text : "Adjust Time of Track Points" *Trans* : " Text : "Join Tracks" *Trans* : " Text : "Join Track" *Trans* : " Text : "Join as new Section" *Trans* : " Text : "Join the Tracks" *Trans* : " Text : "Join" *Trans* : " Text : "Edit Properties of the Selected Trackpoint" *Trans* : " Text : "Remove Track Sections" *Trans* : " Text : "Copy to Track No" *Trans* : " Text : "Time Zone Offset (mins)" *Trans* : " Text : "Adjustment Time (mins)" *Trans* : " Text : "Street" *Trans* : " Text : "Street to Find" *Trans* : " Text : "Suburb" *Trans* : " Text : "Facility" *Trans* : " Text : "Save the Selected Waypoint Set" *Trans* : " Text : "Load a Waypoint Set" *Trans* : " Text : "Change Description" *Trans* : " Text : "Append Waypoints" *Trans* : " Text : "Anti-pollution" *Trans* : " Text : "Law enforcement vessel" *Trans* : " Text : "Medical Transport" *Trans* : " Text : "Unknown" *Trans* : " Text : "Under way using engine" *Trans* : " Text : "At anchor" *Trans* : " Text : "Not under command" *Trans* : " Text : "Restricted manoeuvrability" *Trans* : " Text : "Constrained by her draught" *Trans* : " Text : "Moored" *Trans* : " Text : "Aground" *Trans* : " Text : "Engaged in Fishing" *Trans* : " Text : "Under way sailing" *Trans* : " Text : "Base" *Trans* : " Text : "Base Station" *Trans* : " Text : "Pilot vessel" *Trans* : " Text : "SAR vessel" *Trans* : " Text : "Tug" *Trans* : " Text : "Port tender" *Trans* : " Text : "Number of Active Points reached (2000)" *Trans* : " Text : "Number of Active Track Points reached (2000)" *Trans* : " Text : "This ozfx3 format version is not recognised." *Trans* : " Text : "Moving map Not available with Google Maps" *Trans* : " Text : "When you purchase OziExplorer you are supplied with a user name and key code. Enter them into the fields provided." *Trans* : " Text : "Could not open Comm port for AIS Communication" *Trans* : " Text : "Waypoint Not Selected" *Trans* : " Text : "Step 1 : Find the KAP, CAP, EAP or NOS file of the BSB or NOS/GEO Chart you want to import" *Trans* : " Text : "Wpt" *Trans* : " Text : "New Project" *Trans* : " Text : "Not a vaild rt2 file." *Trans* : " Text : "Map File (*.map)|*.map" *Trans* : " Text : "Route File (*.rte)|*.rte" *Trans* : " Text : "Waypoint File (*.wpt)|*.wpt" *Trans* : " Text : "Event File (*.evt)|*.evt" *Trans* : " Text : "Track File (*.plt)|*.plt" *Trans* : " Text : "Point File (*.pnt)|*.pnt" *Trans* : " Text : "There is no item Selected" *Trans* : " Text : "Item is not located on this Map" *Trans* : " Text : "Could not connect to www.oziexplorer3.com to check for updates" *Trans* : " Text : "Did not process all files." *Trans* : " Text : "They were not all saved." *Trans* : " Text : "A file has not been selected in the list." *Trans* : " Text : "Replace the current file" *Trans* : " Text : "with the new file" *Trans* : " Text : "The file cannot be loaded, incorrect file header" *Trans* : " Text : "The Project has changes which have not been Saved." *Trans* : " Text : "Save the Project File?" *Trans* : " Text : "The Project File must be saved first." *Trans* : " Text : "The Google Earth program was not found." *Trans* : " Text : "There is no data to process." *Trans* : " Text : "Wp Set is not selected in List" *Trans* : " Text : "Gps On" *Trans* : " Text : "Gps Off" *Trans* : " Text : "FIX" *Trans* : " Text : "This will Split the Track into its sections" *Trans* : " Text : "These Maps have a limit of no greater than A4 size paper for map printing." *Trans* : " Text : "Delete file" *Trans* : " Text : "Select a GPS Type" *Trans* : " Text : "GetCoding must be overriden in %s" *Trans* : " Text : "Cannot set this property value while Position is bpAuto" *Trans* : " Text : "Class '%s', already in class map" *Trans* : " Text : "Duplicated button name" *Trans* : " Text : "Automation wrapper for the Application can only be created with a TApplication" *Trans* : " Text : "Tracks Received" *Trans* : " Text : "Log Track Tail" *Trans* : " Text : "Delete the Map Image Thumbnails used for MapView. It is OK to delete the thumbnails at any time, they will be recreated when needed." *Trans* : " Text : "Tracking" *Trans* : " Text : "Not connected to the GPS - Use the \"Start NMEA Communication with GPS\" on the \"Moving Map\" menu to connect to the GPS" *Trans* : " Text : "Please Wait" *Trans* : " Text : "This GPS model does not support Track Upload" *Trans* : " Text : "Not Approaching" *Trans* : " Text : "The Hint messages have been reset." *Trans* : " Text : "No more maps found." *Trans* : " Text : "No more maps found for this location." *Trans* : " Text : "Auto Search for more detailed map has been turned off." *Trans* : " Text : "GPS not Configured" *Trans* : " Text : "Elev" *Trans* : " Text : "There is no route selected." *Trans* : " Text : "Waypoint File is already Loaded" *Trans* : " Text : "Do you want to Clear the Track Tail" *Trans* : " Text : "No data found" *Trans* : " Text : "degrees/min" *Trans* : " Text : "deg/min" *Trans* : " Text : "No Waypoints, Routes or Tracks found in file." *Trans* : " Text : "Other - Next Page" *Trans* : " Text : "Clear the Selected Track" *Trans* : " Text : "Mov Map - GPS Fix Data" *Trans* : " Text : "Options - Project Manager" *Trans* : " Text : "Other - View Map Position in Google Earth" *Trans* : " Text : "Other - Save Waypoints and Tracks to Google Earth (KML file)" *Trans* : " Text : "Other - Load Waypoints and Tracks from Google Earth (KML file)" *Trans* : " Text : "Other - Save Waypoints and Tracks to GPX File" *Trans* : " Text : "Other - Load Waypoints and Tracks from GPX File" *Trans* : " Text : "Other - Zoom Data Extents" *Trans* : " Text : "Map - More Detailed Map" *Trans* : " Text : "Map - Less Detailed Map" *Trans* : " Text : "Other - Previous Page" *Trans* : " Text : "View - Show/Hide Waypoints" *Trans* : " Text : "View - Show/Hide Events" *Trans* : " Text : "Square Metres" *Trans* : " Text : "Kilometres" *Trans* : " Text : "Metres" *Trans* : " Text : "The Project Manager has changes which have not been Saved" *Trans* : " Text : "Length" *Trans* : " Text : "Hidden" *Trans* : " Text : "A Garmin Mass Storage GPS was not found." *Trans* : " Text : "Info Text" *Trans* : " Text : "Menu Background" *Trans* : " Text : "Menu Text" *Trans* : " Text : "Scroll Bar" *Trans* : " Text : "3D Dark Shadow" *Trans* : " Text : "3D Light" *Trans* : " Text : "Window Background" *Trans* : " Text : "Window Frame" *Trans* : " Text : "Window Text" *Trans* : " Text : "No help keyword specified." *Trans* : " Text : "Money Green" *Trans* : " Text : "Sky Blue" *Trans* : " Text : "Cream" *Trans* : " Text : "Medium Gray" *Trans* : " Text : "Active Border" *Trans* : " Text : "Error removing control from dock tree" *Trans* : " Text : "Error setting %s.Count" *Trans* : " Text : "Unable to find a Table of Contents" *Trans* : " Text : "No help found for %s" *Trans* : " Text : "No context-sensitive help installed" *Trans* : " Text : "No topic-based help system installed" *Trans* : " Text : "Cannot open clipboard" *Trans* : " Text : "Picture:" *Trans* : " Text : "(None)" *Trans* : " Text : "Yes to &All" *Trans* : "