OziExplorer 3D - Configuration

System Tab

Load Last File - Ticking this box will cause the last map being used to be automatically loaded the next time you run the software.

Wire Frame Rotate - If ticked, the wire frame will be used during rotating, zooming or moving the map. This will speed up screen refresh time. It is recommended this is ticked on slow systems and some graphics cards.

No Elevation < Zero - If ticked, elevations less than zero will be set to zero.

Elevation Unit - Specify the units the elevations will be displayed in.

Default Height Factor - Specify the default height factor for the displayed map. The height factor for the active map can be adjusted on the Map Control.

Max Height Factor - Specify the maximum height factor allowed on the Map Control height factor adjustment.

Max Elevation Offset - Specify the maximum Elevation Offset allowed, see the Map Control help for details on how the Elevation offset is used.

Max Map Vertical Offset - Specify the maximum Map Vertical Offset allowed, see the Map Control help for details on how the Map Vertical offset is used.

Back Color - Specify the color to be used for the map window background.

Map Tab

Show Map Features - If ticked, map features will be shown on the map.

Show Map Comments - If ticked, map comments will be shown on the map.

Always Show Fog - If ticked, fog will always be applied to the map. Fog can be turned off from the fog toolbar button.

Elevation Pointers - Specify the color to be used for the elevation pointers and the color and font to be used for the labels.

Waypoints Tab

Above Color - Specify the color for the waypoint indicator above the elevation at the waypoint position.

Below Color - Specify the color for the waypoint indicator below the elevation at the waypoint position.

Label - The waypoint label can display various information about the waypoint.

Draw - Specifies the method to display the waypoint information.

Points Tab

Label - The point label can display various information about the waypoint.

Draw - Specifies the method to display the point information.

Tracks Tab

Draw - Specifies whether to display the track with elevation.

Moving Map Tab

Above Color - Specify the color for the moving map indicator above the elevation at the position.

Below Color - Specify the color for the moving map indicator below the elevation at the position.