Data Output Types
Most GPS receivers output standard NMEA data but a small number may output other formats.
Internal GPS Receiver
Many PDA's also have an inbuilt GPS receiver, these can be used by OziExplorerCE. In OziExplorerCE configuration you must specify the port the GPS uses.The baud rate must be set to the rate the gps uses (normally (but not always) 4800).
External GPS ReceiverA cable to connect the standard CE device serial cable to the standard GPS serial cable is required. A diagram of how to wire this cable is in this document.
Compact Flash GPSCompact Flash GPS receivers that plug into the compact flash slot of your CE device.
Bluetooth GPS Receiver
All Bluetooth connected GPS receivers can be used with OziExplorerCE. The GPS must be "paired" to the PDA using a serial port. In OziExplorerCE configuration you must specify the port your PDA is using for bluetooth communication. The baud rate must be set to the rate your gps uses (normally (but not always) 4800).